575 intercooler what works best?
11-03-2005, 03:55 PM
#2
Platinum Member
Platinum Member
Re: 575 intercooler what works best?
Friend just installed superchillers on his works fine. It did raise the engines by 4".
I have them also and have been very happy.
Got them from Fred/TooOld/Trick Marine/ Burger King/ Skater Cigarette Sutphen Formula Ex-owner...
I have them also and have been very happy.
Got them from Fred/TooOld/Trick Marine/ Burger King/ Skater Cigarette Sutphen Formula Ex-owner...
11-03-2005, 04:19 PM
#3
Platinum Member
Platinum Member
Re: 575 intercooler what works best?
Originally Posted by TRICK
Superchillers will work great and can be purchased at a better price than the others.
They offer a complete kit for the 575. Call if I can help. We offer good discounts on Superchillers.
Includes:
1 Color Matched SuperChiller®
1 Blower Pulley
1 Belt
1 Stainless Steel Hose Extension
Fred
Trick Marine
They offer a complete kit for the 575. Call if I can help. We offer good discounts on Superchillers.
Includes:
1 Color Matched SuperChiller®
1 Blower Pulley
1 Belt
1 Stainless Steel Hose Extension
Fred
Trick Marine
11-03-2005, 04:40 PM
#5
Registered
Join Date: Dec 2000
Location: Puerto Vallarta Mx, Lake tahoe Ca,
Posts: 1,333
Likes: 0
Received 1 Like
on
1 Post
Re: 575 intercooler what works best?
i got 575's with whipple coolers work awsome neat clean install fit under hatch with out major mods
blue to match
with middle road pulleys AZ s&m kit and misc i getting 698-700 hp ea mota
blue to match
with middle road pulleys AZ s&m kit and misc i getting 698-700 hp ea mota
11-03-2005, 05:08 PM
#6
Registered
Re: 575 intercooler what works best?
I went with Whipple too because I didn't have hatch clearance. More complex to install than the superchiller, but significantly lower (2 3/8"s), and it does work as Jonas says.
In addition, I'm running a 3" blower pulley, and AZSM ECU recurve and boost kit. I also found a Hardin Marine water pressure regulator that cuts off the intercooler at idle.
Don't forget to add a sea strainer to keep the intercooler from clogging.
Regards,
Steve
In addition, I'm running a 3" blower pulley, and AZSM ECU recurve and boost kit. I also found a Hardin Marine water pressure regulator that cuts off the intercooler at idle.
Don't forget to add a sea strainer to keep the intercooler from clogging.
Regards,
Steve
Last edited by Steve Zuckerman; 11-03-2005 at 05:13 PM.
11-03-2005, 07:01 PM
#7
Registered
Thread Starter
Re: 575 intercooler what works best?
Originally Posted by Steve Zuckerman
I went with Whipple too because I didn't have hatch clearance. More complex to install than the superchiller, but significantly lower (2 3/8"s), and it does work as Jonas says.
In addition, I'm running a 3" blower pulley, and AZSM ECU recurve and boost kit. I also found a Hardin Marine water pressure regulator that cuts off the intercooler at idle.
Don't forget to add a sea strainer to keep the intercooler from clogging.
Regards,
Steve
In addition, I'm running a 3" blower pulley, and AZSM ECU recurve and boost kit. I also found a Hardin Marine water pressure regulator that cuts off the intercooler at idle.
Don't forget to add a sea strainer to keep the intercooler from clogging.
Regards,
Steve
