Earl's -20 Braided Hose Ends Needed
#1
VIP Member
VIP Member
Thread Starter
Earl's -20 Braided Hose Ends Needed
My main man Bob at Vermont Home and Marine has searched high and low for these to complete my motor job. He's tried Fred, other East Coast guys and all the West Coast guys. No luck.
I need 24 in blue or chrome. Anyone have any collecting dust somewhere or know where some are available?
Thanks,
Neil
I need 24 in blue or chrome. Anyone have any collecting dust somewhere or know where some are available?
Thanks,
Neil
#2
VIP Member
VIP Member
Re: Earl's -20 Braided Hose Ends Needed
Originally Posted by drypipetiger
My main man Bob at Vermont Home and Marine has searched high and low for these to complete my motor job. He's tried Fred, other East Coast guys and all the West Coast guys. No luck.
I need 24 in blue or chrome. Anyone have any collecting dust somewhere or know where some are available?
Thanks,
Neil
I need 24 in blue or chrome. Anyone have any collecting dust somewhere or know where some are available?
Thanks,
Neil
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
#4
VIP Member
VIP Member
Thread Starter
Re: Earl's -20 Braided Hose Ends Needed
Originally Posted by OldSchool
Try Summit racing or Jeg's websites
Last I heard you were going to Key West? Believe it or not I carted that poker run video you loaned me, thinking you would be there.... I guess thats easier than mailing it from the post office I visit every freakin day...
Neil
#5
VIP Member
VIP Member
Thread Starter
Re: Earl's -20 Braided Hose Ends Needed
Originally Posted by open72
biggest i found is -16 , - 20 is BIG ,whatcha plumin...
#8
VIP Member
VIP Member
Thread Starter
Re: Earl's -20 Braided Hose Ends Needed
Originally Posted by 42MTI
I've ordered them from summit in the past, no problems. Also arrow speed warehouse has them.
Thanks
Neil
#9
Charter Member #40
Charter Member
Re: Earl's -20 Braided Hose Ends Needed
I have 6-8 of them and about 15' of ss braided hose I can part with if you need the stuff. Also have some #20-1 1/4 npt adapters. Couldn't ship till next Thursday when I get back.
#10
'05 Concept SF23
VIP Member
Re: Earl's -20 Braided Hose Ends Needed
Try Goodridge Hose. they are a mfg and have a warehouse/mfg shop in NC around Mooresville. All the Indy and NASCAR guys use them. This is the brand that Teague uses and will work on Earl's hose. If you are using for raw water do not run in salt as the alum will not hold up very long. Joe Murray