Earl's -20 Braided Hose Ends Needed
 

My main man Bob at Vermont Home and Marine has searched high and low for these to complete my motor job. He's tried Fred, other East Coast guys and all the West Coast guys. No luck.

I need 24 in blue or chrome. Anyone have any collecting dust somewhere or know where some are available?

Thanks,

Neil

Re: Earl's -20 Braided Hose Ends Needed
 

Try Summit racing or Jeg's websites

Re: Earl's -20 Braided Hose Ends Needed
 

biggest i found is -16 , - 20 is BIG ,whatcha plumin...

Re: Earl's -20 Braided Hose Ends Needed
 

Checked those Craig, but thanks.

Last I heard you were going to Key West? Believe it or not I carted that poker run video you loaned me, thinking you would be there.... I guess thats easier than mailing it from the post office I visit every freakin day...

Neil

Re: Earl's -20 Braided Hose Ends Needed
 

Little of this, little of that... :drink:

Re: Earl's -20 Braided Hose Ends Needed
 

talk to strip , he can find anything :D :D (nice motors :D ) wet exhaust is for sissys :drink:

Re: Earl's -20 Braided Hose Ends Needed
 

I've ordered them from summit in the past, no problems. Also arrow speed warehouse has them.

Re: Earl's -20 Braided Hose Ends Needed
 

I'll make sure he did check Summit, and check Arrow.

Thanks

Neil

Re: Earl's -20 Braided Hose Ends Needed
 

I have 6-8 of them and about 15' of ss braided hose I can part with if you need the stuff. Also have some #20-1 1/4 npt adapters. Couldn't ship till next Thursday when I get back.

Re: Earl's -20 Braided Hose Ends Needed
 

Try Goodridge Hose. they are a mfg and have a warehouse/mfg shop in NC around Mooresville. All the Indy and NASCAR guys use them. This is the brand that Teague uses and will work on Earl's hose. If you are using for raw water do not run in salt as the alum will not hold up very long. Joe Murray

Re: Earl's -20 Braided Hose Ends Needed
 

call me on friday Neil, I have a speed warehouse that I get stuff at much cheaper than summit...My cost is your cost...Rob

Re: Earl's -20 Braided Hose Ends Needed
 

Thanks a bunch Rob. I may have Bob from Vermont Home and Marine buzz you so there is no confusion as to what he's looking for.

Thanks,

Neil

Re: Earl's -20 Braided Hose Ends Needed
 

okie toll free is 866-776-8632....

Re: Earl's -20 Braided Hose Ends Needed
 

The never ending hunt for "bling-bling". :D

Re: Earl's -20 Braided Hose Ends Needed
 

If they are aluminum fitting to stainless fitting lasted about 6 years until they split. Aluminum fitting to aluminum fitting been going about 10 years now. I do flush with Salt Away after EVERY use.

Re: Earl's -20 Braided Hose Ends Needed
 

MORELAND HOSE On Long Island Can Get Them In Stainless Very Expensive But Last Longer Than The Boat

Re: Earl's -20 Braided Hose Ends Needed
 

moreland hose is the guy 631-563-7071 ask for billy

Re: Earl's -20 Braided Hose Ends Needed
 

:stupid: