|
Re: Bonding advice
I agree with ratman, the JB weld is great stuff. I used it on a oil pan and it lasted for years. When you mount the system back on I would find something to support the hose to and tie it down with a clamp so there is no movement. It should last for a very long time.
|
Re: Bonding advice
3 Attachment(s)
Eureka, ratman! Looks like JB Weld was the original bonding agent, too. Good as new. Thanks for the tip.
|
Re: Bonding advice
Originally Posted by RedDog382
Had this fitting break off my SeaLand Vacuflush holding tank. Original part was $30 to replace, but it has been redesigned and superceeded to an assembly that includes the pump motor for a mere $345.
|
Re: Bonding advice
Looks like you got it.
Silver solder would have worked as well. |
Re: Bonding advice
Originally Posted by Tantrum
Looks like you got it.
Silver solder would have worked as well. Silver solder would be the way to go there if the box were metal |
Re: Bonding advice
Is that housing plastic or brass?
|
Re: Bonding advice
Originally Posted by Troutly
The look of that repair isn't up to Formula standard! :p
|
Re: Bonding advice
Originally Posted by US1 Fountain
Is that housing plastic or brass?
|
Re: Bonding advice
ill 3rd the JB Weld, that sh** is awesome
|
| All times are GMT -5. The time now is 12:22 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.