Notices

625hp in a 29' Fountain?

Thread Tools
 
Old 12-15-2005, 10:09 PM
  #1  
Registered
Thread Starter
 
Join Date: Nov 2005
Location: Or-E-gone
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
Question 625hp in a 29' Fountain?

Has anyone installed 625+hp in a 29' fountain fever? The boat is a 2002 vintage. The boat will run 77-78mph with a 525 efi. However, hoping to get 85+mph with that amount of hp.
Cam-shaft is offline  
Old 12-15-2005, 10:52 PM
  #2  
Masher touches my
Gold Member
 
Outdrive1's Avatar
 
Join Date: Aug 2004
Location: Phoenix, Az
Posts: 2,280
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 625hp in a 29' Fountain?

Originally Posted by ANDREW REALTOR
I thought it whould be faster with 525's than 77-78 how fast does the dealer say it goes with 525's with 625 I whould guess you should see at least 80-85

I think he is referring to a single motor application in which case those are some decent numbers.
Outdrive1 is offline  
Old 12-16-2005, 09:29 AM
  #3  
Registered
Thread Starter
 
Join Date: Nov 2005
Location: Or-E-gone
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 625hp in a 29' Fountain?

Yes this is a single. They only put twin small blocks in the newer 29' fountains. Anymore input?
Cam-shaft is offline  
Old 12-16-2005, 09:49 AM
  #4  
Registered
VIP Member
 
Join Date: Jan 2004
Location: Boca Raton, FL
Posts: 3,682
Likes: 0
Received 4 Likes on 4 Posts
Default Re: 625hp in a 29' Fountain?

We had a 27' with a 525 SC at Everglades years ago with no steps and I KNOW it ran 75 MPH. I got a ticket in Port Everglades!
Edward R. Cozzi is offline  
Old 12-16-2005, 10:29 AM
  #5  
SORE MEMBER
Platinum Member
 
Wobble's Avatar
 
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like on 1 Post
Default Re: 625hp in a 29' Fountain?

Originally Posted by Cam-shaft
Has anyone installed 625+hp in a 29' fountain fever? The boat is a 2002 vintage. The boat will run 77-78mph with a 525 efi. However, hoping to get 85+mph with that amount of hp.
Has this speed been verified? That is a very good number for that power.
Wobble is offline  
Old 12-16-2005, 10:36 AM
  #6  
Registered
 
STRAIGHTPRIORITY's Avatar
 
Join Date: Jan 2005
Location: VIRGINIA BEACH, VA
Posts: 837
Likes: 0
Received 1 Like on 1 Post
Default Re: 625hp in a 29' Fountain?

01 fever f1 boat... 89-93 with 700.... i dont know if that helps.
STRAIGHTPRIORITY is offline  
Old 12-16-2005, 10:37 AM
  #7  
A to Z
Platinum Member
 
Sean H's Avatar
 
Join Date: Apr 2004
Location: KC/LOTO
Posts: 9,156
Likes: 0
Received 1 Like on 1 Post
Default Re: 625hp in a 29' Fountain?

fountain website says 77+ with 525....
Sean H is offline  
Old 12-16-2005, 10:48 AM
  #8  
Registered
 
Big Block Billy's Avatar
 
Join Date: Jun 2001
Location: Babylon N.Y.
Posts: 710
Likes: 0
Received 1 Like on 1 Post
Smile Re: 625hp in a 29' Fountain?

To much power is never enough. Pump it up ! as much as you can. It's addicting isn't it ? After going 90 with a smile that wraps around my entire head !, it's hard to enjoy a cruise in a "slow" boat. to me 625hp isn't enough. Unless it goes in a Skater... I'll find out how my 650-675 horse 540 does in my 24 Formula this summer. Maybe not enough boat but never too much motor !!! . You have a decent , good sized boat. Enjoy it !!! BBB
Big Block Billy is offline  
Old 12-16-2005, 10:54 AM
  #9  
Charter Member #34
Charter Member
 
Dock Holiday's Avatar
 
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 1 Like on 1 Post
Default Re: 625hp in a 29' Fountain?

There is a 29 Fountain (single engine) on Lake Wylie south of Charlotte with over 1000 HP running 110 MPH!

Maybe some of the guys that know more of the details on this boat will come on here and share.
Dock Holiday is offline  
Old 12-16-2005, 11:49 AM
  #10  
Registered
Thread Starter
 
Join Date: Nov 2005
Location: Or-E-gone
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 625hp in a 29' Fountain?

More input needed. I would like to make more power however I do not want to give up the stock appearance of the 525efi. Those 525efi headers are application specific, as far as the exhaust flanges are drilled.
Cam-shaft is offline  


Quick Reply: 625hp in a 29' Fountain?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.