brodix heads on a 500efi
#1
Registered
Thread Starter
brodix heads on a 500efi
thinking about putting on a set... how much hp would i gain?
would i have to reflash the ecu?
anyone have prices on brodix heads?
would i have to reflash the ecu?
anyone have prices on brodix heads?
#2
Registered
Re: brodix heads on a 500efi
I put a set of Brodix Heads on my 2001 500EFI and picked up 400 RPMS. We did not Dyno the motors but had a good base line on RPMS in boat. We did port match the intake to heads bowls were ported ( NOT MUCH ) cleaned up the Intake runners. We did reflash the ECU, very little on fuel and added a few RPMS to the rev limiter depending on what prop I would be using. Also saves a little weight on the tail end.
#7
Registered
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
Re: brodix heads on a 500efi
call richie zul, the man. was at his place for a run, an hp 500 with those heads i believe. and some other stuff. made 640 hp @5400, and ran to 5900. he will have your answer.
#8
Registered
Re: brodix heads on a 500efi
Originally Posted by monstaaa
call richie zul, the man. was at his place for a run, an hp 500 with those heads i believe. and some other stuff. made 640 hp @5400, and ran to 5900. he will have your answer.
Thread
Thread Starter
Forum
Replies
Last Post
cloudmaster_321
Do It Yourself, Boating on a Budget
13
09-08-2008 01:15 AM