Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   pair 500 hps (https://www.offshoreonly.com/forums/general-boating-discussion/120234-pair-500-hps.html)

JERSEY DEVIL 01-12-2006 07:54 AM

pair 500 hps
 
just wondering what a pair of 500 hps is worth year 2000 they are carbs with and without exhaust buy the way the seals are not broken thanks

CIG3 01-12-2006 11:37 AM

Re: pair 500 hps
 
how many hours?

JERSEY DEVIL 01-12-2006 11:46 AM

Re: pair 500 hps
 

Originally Posted by CIG3
how many hours?

i would say in the range of 200

Edward R. Cozzi 01-12-2006 12:31 PM

Re: pair 500 hps
 
Used in fresh or salt water?

JERSEY DEVIL 01-12-2006 12:39 PM

Re: pair 500 hps
 

Originally Posted by Edward R. Cozzi
Used in fresh or salt water?

salt

CIG3 01-12-2006 02:47 PM

Re: pair 500 hps
 
The answers give you a low ball price.

200 Hours for a carb means new valve spring at a minimum.

The salt will scare alot of people, as they will think the worst.

My opinion 4000-5000 with exhaust.

Stormrider 01-12-2006 03:38 PM

Re: pair 500 hps
 
4-5000ea?

shawn 01-12-2006 04:40 PM

Re: pair 500 hps
 
The answers give you a low ball price.

200 Hours for a carb means new valve spring at a minimum.

The salt will scare alot of people, as they will think the worst.

My opinion 4000-5000 with exhaust.


When I did mine at 200 hours, they needed head gaskets in addition to the valve spring jo. They only had a thread left between a few cylinders. While its apart, new lifters, cometic gaskets etc. The intake also takes a beating from the salt, mine needed some touch up. Teague also writes about the valve seats needing attention. They will take some money to make right.

JERSEY DEVIL 01-13-2006 07:38 AM

Re: pair 500 hps
 

Originally Posted by shawn
The answers give you a low ball price.

200 Hours for a carb means new valve spring at a minimum.

The salt will scare alot of people, as they will think the worst.

My opinion 4000-5000 with exhaust.


When I did mine at 200 hours, they needed head gaskets in addition to the valve spring jo. They only had a thread left between a few cylinders. While its apart, new lifters, cometic gaskets etc. The intake also takes a beating from the salt, mine needed some touch up. Teague also writes about the valve seats needing attention. They will take some money to make right.

thamks a lot you have been a great help just found out that the top halfs were refreshed in 2002


All times are GMT -5. The time now is 06:57 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.