Best price on CMI elbow top headers.....
 

Anybody buy a set of brand elbow tops lately? Who has the best prices?
Thanks, Eric

I must check on a set for are race boat tomarrow and will let you know. Do you need them for a bravo and how mant sets ?


Rob
RW Auot & Marine
717-938-8545

Thanks Rob! I need one set. Standard Bravo without tailpipes. I already have tails. Prefer all polished but will consider satin/polished or all satin. Also need rubber water dist tubes and gaskets(to block)

Thanks, Eric Garrett

Prices on e-tops are as follows:

Polished $2400.00 per set.
Polished/Satin $2180.00 per set.
Satin finish $2075.00 per set.

Tail pipes are $485.00 (std. bravo cut outs)

If you have a standard Bravo cut out you can use their new one piece header $2150.00

plus shipping & handling

Rob
717-938-8545

Eric,
Check with John Cosker @ Marine Performance, (386)-760-6464, John gets great prices on almost anything Hi-perf.
How's the project coming? Sounds like you are getting closer to installing your new motor! :D
MD

Thanks for the number Dean. I 'll call him. The motor is with Bruce in St. Louis. Should be done around end of Febuary or so. I need to get my offshore mount installed and go through my drive this month. So it's ready for the new motor in March.
Eric

If you need a set that will fit standard Bravo exhaust hole outlets. (Wet tailpipes) CMI is introducing a very reasonable system at the Miami Boat Show. I can get you the price on them.

Eric are your headers shot?Call me I have a contact for new saten CMI headers at great pricing new.
Randy

Unfortunatly I don't have standard Bravo openings. The tail pipes I have where custom built for my boat. So I only need the headers.

Randy, no my CMI's are not shot. They are fine. I just need the new "flex flare" connection to help make room for external mufflers. Right now there is no clearance under the new swim platform, for mufflers.
When you get a chance, e-mail me the price you can get on the CMI's.

Thanks, Eric

Anybody else?