Carbon Fiber dash
 

On boats with carbon fiber dashes, are they actually carbon fiber or are they aluminum with some type of overlay?

Re: Carbon Fiber dash
 

Some are real carbon fiber, some are an overlay of printed material. Some overlays are over a plastic material.

Basically,there's all kinds of real carbon fiber dash's and carbon fiber look dashes including clors.

Re: Carbon Fiber dash
 

Check out the sample pack from this site. If you plan
on DIY dash project.

http://www.robotcombat.com/marketplace_carbonfiber.html

Re: Carbon Fiber dash
 

Carbon fiber is COOL. :evilb:

Re: Carbon Fiber dash
 

3600Cat, that dash is outstanding!!

If you purchase a DIY carbon fiber sheet from robotcombat.com for example, how would you address a panel for switches... would you send it somewhere to get the switch function laser etched or have stickers made up, etc? What would be the cleanest way to go about this? Looking for ideas like RonS.

Thanks,
Dan

Re: Carbon Fiber dash
 

The Outerlimits gtx's dash's are completely carbon fiber. Some of the carbon fiber dashes's seen are just mock carbon fiber or just a skin.

Re: Carbon Fiber dash
 

Thank's for the replies, not sure if I want to do some kind of overlay on what I have or just do all new panels on my 336.

Formula has aluminum, not sure if fabricating all the panels is worth the headache or if I should just have a place like extreme marine do everything.

Animal house, do you know how thick the carbon fiber is on the outer limits?

Re: Carbon Fiber dash
 

Does anyone know how I can properly identify the function of each switch on a new carbon fiber dash panel? Stickers, laser etching, etc?? Suggestions on where to look??
Thanks,
Dan

Re: Carbon Fiber dash
 

Have it laser etched then have the etching painted with
a contrasting color.
Im sure who ever provides the service has done this before,
should be simple for them.
If you DIY use a thin brush that is as thin as the deepest
part of the etching.
Should be a easy process then hit it with some spray can clear.
2 or 3 light coats should keep that small area of paint
intact for a long time. Might not even need the clear but it
wouldnt hurt.

Re: Carbon Fiber dash
 

Most people down here use a company called Paneltronics, Inc.
It's expensive, but worth it.