Offshoreonly.com - IMCO 2" shorties group purchase? Anyone interested?

Page 7 of 16

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - IMCO 2" shorties group purchase? Anyone interested? (https://www.offshoreonly.com/forums/general-boating-discussion/120414-imco-2-shorties-group-purchase-anyone-interested.html)

Strip Poker 388

01-16-2006 11:23 PM

Re: IMCO 2" shorties group purchase? Anyone interested?

Quote:

Originally Posted by Bob280Silencer

Polished vs satin,water "sticks" to polished causing drag.Satin finish "rejects" the water off the surface.Airplane racers use "bubble tape" on the top of their wings for the some reason,remove air off the wing.Is it purchase time yet?BOB

Wait we have someone else working on it also

Harper220

01-16-2006 11:38 PM

Re: IMCO 2" shorties group purchase? Anyone interested?

Bob, check your pm.

speedygonzalez

01-17-2006 12:26 AM

Re: IMCO 2" shorties group purchase? Anyone interested?

i'll take one @ this prices

articfriends

01-17-2006 02:59 AM

Re: IMCO 2" shorties group purchase? Anyone interested?

Quote:

Originally Posted by Bob280Silencer

Sounds like tpmarine gets the contract.If I'm reading this right,$2100 complete,vert. shaft,bearings & prop shaft as in "bolt on"?Assembled? If this is right,I'm ready.BOB

Only in a dream world could you get a "complete" turn-key imco lower for that price. The bare hsg w/vert shaft for 1799$ is a good price,the extra 300$ was putting YOUR good used gears,bearings,prop shaft,prop shaft carrier,lock nut etc in the case. Maybe tmp was going to throw in the prop carrier o-ring and load ring but being realistic they couldn't include the rest of the parts,Smitty

articfriends

01-17-2006 03:02 AM

Re: IMCO 2" shorties group purchase? Anyone interested?

Quote:

Originally Posted by articfriends

I may be interested but before committing I'm going to call Max worx as their billet lower is supposed to have a double lower vert shaft bearing that helps to eliminate shaft/gear flex and failure. I have a feeling though they are probably another grand more,I'm a dealer for them though and planned on getting something by spring so I'll call tomorrow and find out the price and post,Smitty

I called max machine,jason is supposed to call me back on a group purchase but he was talking 2800$ for a bare case plus 5 or 6 hundred for their shaft so you can't compare their prices to a Imco,Smitty

Strip Poker 388

01-17-2006 08:14 AM

Re: IMCO 2" shorties group purchase? Anyone interested?

Quote:

Originally Posted by articfriends

I figured it would be high , But its sharp looking.Smitty what foot you running?

Rob

AIR TIME

01-17-2006 08:27 AM

Re: IMCO 2" shorties group purchase? Anyone interested?

for 300 you get all that I agree with smitty, your old stuff set up. I think a new prop shaft would be about 600. art

Madcow

01-17-2006 09:02 AM

Re: IMCO 2" shorties group purchase? Anyone interested?

So is a satin lower just raw aluminum?

RHC	01-17-2006 09:13 AM

Re: IMCO 2" shorties group purchase? Anyone interested?

Quote:

Originally Posted by articfriends

and you can't compare an Imco to the Maxx Machine either!!! :D

RHC

Marginmn

01-17-2006 10:05 AM

Re: IMCO 2" shorties group purchase? Anyone interested?

I went from standard length sportmasters to -2 imco polished shorties and picked up 5 mph on my 38 Fountain fever running 525 efi's. I'm happy as heck with them, although my water pressure shot through the roof. Looks like I'll need to add relief valves and sea strainers next season after switching to the imco's.

http://www.offshoreonly.com/forums/s...d.php?t=115608

All times are GMT -5. The time now is 08:54 PM.

Page 7 of 16

« First

Last »

Show 40 post(s) from this thread on one page