Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Effects of stand off boxs (https://www.offshoreonly.com/forums/general-boating-discussion/121239-effects-stand-off-boxs.html)

Titan 01-25-2006 10:37 PM

Re: Effects of stand off boxs
 
3 Attachment(s)
Back4More

Thanks for posting. I am horrible with the pics resizing thing. I went with the Neutral Imco box as well. The reason for this was I heard that the stellings boxes blow the U joints out.

Iamfaster

Hope to see you this summer out in Greenport over the summer. You have to see the boat in person to fully appreciate it. But here is a shot of the horsepower behind it!!!!

PatriYacht 01-26-2006 05:52 AM

Re: Effects of stand off boxs
 
The Imco boxes allow you to use a stock Merc. rubber coupler. The Stelling box uses a solid driveshaft bolted to the flywheel. I don't have proof but I would think that the Imco set up is easier on the drives.

hpoffshore 01-26-2006 10:30 AM

Re: Effects of stand off boxs
 
Imco is nice because the long drive-input shaft acts to absorb some torque load spikes; helping the drive. The Stellings allows changing the mounted height on the transom; but it has U-joints inside box to allow for that.


All times are GMT -5. The time now is 09:33 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.