IMCO xtreme sc
 

I'm building a 496 blown motor and Ive been trying to find the best drive for my money,I was considering IMCO,however, I have found some threads saying they ere breaking with blown motors with @ 700-800 hp, and they all say that it happens around 20-30hrs. has anyone heard of this.

Re: IMCO xtreme sc
 

Been there done that...twice. :rolleyes:

Re: IMCO xtreme sc
 

Max Machine Works is probably your best bet :drink:

Re: IMCO xtreme sc
 

I have a pair of the Imco Extreme SC and they are being pushed by a pair of blower motors,never a problem one.

Re: IMCO xtreme sc
 

they are my second choice since I hang out at havasu and they are there. SO I think they will be my first now thanks.

Re: IMCO xtreme sc
 

hyper how much hp are you pushing

Re: IMCO xtreme sc
 

Speedy,
What type of boat and how heavy is it?

Re: IMCO xtreme sc
 

what kind of power did it take to brake your back4more?

I just orderd -2 shoties for my 650's want better luck then you had!

Re: IMCO xtreme sc
 

800...Prop it way up there so your spinning them as fast as your motors WOT will allow.
Don't run RedLine Oil in them either. :rolleyes:

Re: IMCO xtreme sc
 

Max Machine Works :drink:

Re: IMCO xtreme sc
 

the boat is a 26 exp hallett @4300 lbs

Re: IMCO xtreme sc
 

Same here on the twice part, behind 720 hp blower motors. :(

Re: IMCO xtreme sc
 

I"m wondering if its a combination of wheight and hp and not just hp!

Re: IMCO xtreme sc
 

Yes, it is but IMCO rates the drives to 800 hp/tq behind a 10,500 lb boat, that's the problem.

Why rate it that high if it doesn't do what it's supposed to do? You're better off with XR's that are set up properly and cost half as much to replace if something goes wrong. Plus you're boating the very next day because parts are readily available.

I'd trade for XR's any day. :drink: