donzi 16
#1
Registered
Thread Starter
Join Date: Jun 2005
Location: Chalmette,Ponchatoula, Louisiana
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
donzi 16
How much do you think a donzi 16 is worth. no motor to interior and no drive. just the bare hull. decent shape boat with a new transom. Thanks
#3
Registered
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: donzi 16
they are worth 8 to 10k done. so if the hull is nice original gelcoat maybe 2-3k absolute top dollar ,but keep in mind if its an old one and has a steel gas tank you will probably have to remove the deck and replace it.
#4
Registered
Thread Starter
Join Date: Jun 2005
Location: Chalmette,Ponchatoula, Louisiana
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Re: donzi 16
i looked at the boat yesterday and what is weird is that there are no holes for any gauges steering wheel or bolt holes where motor mounts would have been. He said the tramsom was replaced so the tramsom is not cut out for an outdrive. And the captains seat seemed to be on the oppsite side as all of the other ones that i have seen. Are all of the captains seats supposed to be on the right side when you are sittingin the boat? I was thinking someone made this boat out of a mold?
#5
Registered
Join Date: Aug 2005
Location: Lake Hartwell
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Re: donzi 16
Originally Posted by JLAY
i looked at the boat yesterday and what is weird is that there are no holes for any gauges steering wheel or bolt holes where motor mounts would have been. He said the tramsom was replaced so the tramsom is not cut out for an outdrive. And the captains seat seemed to be on the oppsite side as all of the other ones that i have seen. Are all of the captains seats supposed to be on the right side when you are sittingin the boat? I was thinking someone made this boat out of a mold?
Thread
Thread Starter
Forum
Replies
Last Post
dave911
General Boating Discussion
3
03-15-2008 03:30 PM