kevlar scarab???
03-09-2006, 11:33 PM
#11
Registered
Platinum MemberJoin Date: Feb 2005
Location: Huntersville,NC
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Re: kevlar scarab???
I have a 43 Scarab & my brother has 2 38 Scarabs 1 is a Miami Vice edition the other is an Exell they both have kevlar hulls. The exell is stamped kevlar under the serial number & the MV has the letters kv under the serail number. I talk to Donnie Wadek about once a month (he was head of Wellcraft's Scarab line & custom/race division. He told me that every kevlar hull will have kv or kevlar under the serail number. My 43 is glass.
03-10-2006, 07:09 AM
#12
Registered
Thread Starter
Re: kevlar scarab???
Originally Posted by bjlesl
I have a 43 Scarab & my brother has 2 38 Scarabs 1 is a Miami Vice edition the other is an Exell they both have kevlar hulls. The exell is stamped kevlar under the serial number & the MV has the letters kv under the serail number. I talk to Donnie Wadek about once a month (he was head of Wellcraft's Scarab line & custom/race division. He told me that every kevlar hull will have kv or kevlar under the serail number. My 43 is glass.
03-10-2006, 12:25 PM
#15
Registered
Thread Starter
Re: kevlar scarab???
Originally Posted by Madcow
Was anyone even making kevlar boats in 1979? I've never heard of an S type kevlar.
Re: kevlar scarab???
09-12-2006, 11:51 AM
#17
Re: kevlar scarab???
See my similar question:
http://www.offshoreonly.com/forums/s...ghlight=s-type
http://www.offshoreonly.com/forums/s...ghlight=s-type
Originally Posted by X-Rated30
The guy that bought my old Scarab says he has determined the hull is made of Kevlar. It didn't have KV in the HIN as I thought the Kevlar ones did. He says he took a sample to a company he works with that does alot of work with Kevlar and they say that's what it is.
Boat is a 30' Scarab S-Type (1984) with Kaama Drives. Did they make these in Kevlar? Could the company looking at the hull be mistaken?
Anyone know?
Boat is a 30' Scarab S-Type (1984) with Kaama Drives. Did they make these in Kevlar? Could the company looking at the hull be mistaken?
Anyone know?
09-12-2006, 01:06 PM
#18
Registered
Thread Starter
Re: kevlar scarab???
Originally Posted by chopchop
Any chance you could post your findings here as I'm looking at a type S too.
09-12-2006, 04:18 PM
#19
Registered
Thread Starter
Re: kevlar scarab???
got this back today from wellcraft No way to tell at this point if a particular boat back then was made with Kevlar. In '79' Kevlar was not offered as an option on the std order sheet.
Robert Stewart
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, September 12, 2006 2:04 PM
To: Robert L. Stewart
Subject: Contact Request from Wellcraft Website
Contact Request from Wellcraft Website
Robert Stewart
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, September 12, 2006 2:04 PM
To: Robert L. Stewart
Subject: Contact Request from Wellcraft Website
Contact Request from Wellcraft Website
