cost to rig a 10 meter fountain?
 

Can anyone tell me what it would cost to fully rig a 10 meter fountain, complete with power,outdrives, and steering.. the boat is completly bare.. thanks in advance..

Re: cost to rig a 10 meter fountain?
 

depends,,,all good livorsy stuff will cost more than vdo stuff.

Re: cost to rig a 10 meter fountain?
 

What power? what drives? external steering? what tabs? What gauges like fast said, what, what, what... there are lots of them in this question.

Re: cost to rig a 10 meter fountain?
 

yuo'll have about25 to 30k in the rig with parts, like guages,harnesses, cables, throttles, indicators, wire, battery's, batt trays, batt cables,pumps, hoses, misc, etc,,, . dependind on power, add another35- 40 to 80+k , if its used or new. roughly.

good luck.

Re: cost to rig a 10 meter fountain?
 

good luck

jr mike

Re: cost to rig a 10 meter fountain?
 

hope Reggie's helping you

jr

Re: cost to rig a 10 meter fountain?
 

It will cost you more than a good used one already rigged.

Re: cost to rig a 10 meter fountain?
 

Id say 20K Minimum

Re: cost to rig a 10 meter fountain?
 

I agree with dangerous Dave there are a lot of nicely rigged used boats for fair money out there. You have to look but off the top of my head I know of one scarab and one formula both memebers on this site here in the 30's for sale.

But if looking to rig I would say around 25-30k all new unless you want used then it just alot of others peoples problems all in one boat.

Re: cost to rig a 10 meter fountain?
 

Power alone will cost you 15k per side.
Drives about $8-10k per side.
There is 50 just in drivetrain.