need 17x32for blade props
need 17x31or 32 labed props #6 drive,
|
Re: need 17x32for blade props
We have one,RH only,17 1/2 x 32,for any big shaft,including # 6.....The condition is good.However,it does have minor nicks.Therefore,the prop should be magnafluxed,labbed and cut to 17".I would guarantee it by sending the prop to Mercury or B&B for inspection before payment...I believe either of them can match the prop with a LH...B&B will probably find a used match quickest.
|
Re: need 17x32for blade props
I have 17.5 x 32 L 4 b;ade off of a #6 drive of a top gun. one pair $3,000.00
|
Re: need 17x32for blade props
bgchuby01,Do you have a 17.5 x 32 LH plus a set of RH & LH? If yes,what is the condition and price of the LH ?
|
Re: need 17x32for blade props
No, just one set. and the props just came out of the shop.
|
Re: need 17x32for blade props
i need 17x32 not 17 1/2
|
All times are GMT -5. The time now is 06:44 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.