|
Re: Thoughts on 45 Donzi ZX
Originally Posted by ratman
what didn't see the vid of the big amf boats spin...i think the things like 50ft :eek: looked scary as hell to me
|
Re: Thoughts on 45 Donzi ZX
Originally Posted by FunHome
There is one at LOTO that spun out and I think it sunk also. The owner had never had a boat like that before, his prior boat was a 20(something) bayliner. He still owner the boat if I recall correctly.
That makes two..... Sunk ?? I heard ( after ejecting the operator) it hit a sea wall and ran up on shore ( this was down by the dam) :eek: |
Re: Thoughts on 45 Donzi ZX
They do look like huge boats, probably requires more power than others its size to get the speeds you want, but at the same time, it should be able to crush whatever's in its path! Given what the 33 and 38 are like, I bet the 45 is like a condo :cool:
|
Re: Thoughts on 45 Donzi ZX
bada$$ machine we saw 1 yesterday at Elliot Key and they sure are sweet looking. One of the best boats for the money in my 00.2
jr |
Re: Thoughts on 45 Donzi ZX
I was looking at the 45s a few years ago and two builders sent me PMs stating that the hull was unsafe. In both cases, the builders were not trying to sell me anything, just passing on information. In one case, the person was on a 45 that almost rolled over, while in moderate conditions. The boat is not being built anymore (I believe).
Drive one and make your own decision. |
Re: Thoughts on 45 Donzi ZX
It is still being built and has quite a bit of work done to the hull so you can purchase with twins vs trips. I was down at the factory this time last year when they were building a 45. Awesome boat but out of my price range.
|
Re: Thoughts on 45 Donzi ZX
The 45 at LOTO did not sink did hit a sea wall and did some gel and drive damage (not bad for hitting it as hard as it did). Boat was repaired and is operational today by the same owner. Like any boat you need to know what you are doing turning at high rates of speed. Rumor has it driver might have hit something tearing off one drive causing the spin.
|
Re: Thoughts on 45 Donzi ZX
PBM tested one a few issues back. I was actually impressed with the #'s it was running for how big it was.I think it was upper 80's/low 90's w/ 525's
|
Re: Thoughts on 45 Donzi ZX
Originally Posted by thisistank
PBM tested one a few issues back. I was actually impressed with the #'s it was running for how big it was.I think it was upper 80's/low 90's w/ 525's
|
Re: Thoughts on 45 Donzi ZX
Originally Posted by fast fun 2
For the price of a new one i would be in cat. just my two cents though.
|
| All times are GMT -5. The time now is 06:27 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.