FTM Spicewood Tx
#1
Registered
Thread Starter
Join Date: Feb 2005
Location: Southern Minnesota
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
FTM Spicewood Tx
Man what service...
I have my 2005 Nordic Heat down at Full throttle Marine in Spicewood Texas getting some more Horses added to it...Boats 1200 Miles away from me and today I recived a Awesome Video from Bob Lloyd owner of FTM showing my Engine on a stand Running........
I am gonna post a link here where you guys can hear it ....Again I think its awesome.....I am heading down next week to get her so this is very exciting for me
http://media.putfile.com/Bents-Nordic-Engine
I have my 2005 Nordic Heat down at Full throttle Marine in Spicewood Texas getting some more Horses added to it...Boats 1200 Miles away from me and today I recived a Awesome Video from Bob Lloyd owner of FTM showing my Engine on a stand Running........
I am gonna post a link here where you guys can hear it ....Again I think its awesome.....I am heading down next week to get her so this is very exciting for me
http://media.putfile.com/Bents-Nordic-Engine
#2
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
Re: FTM Spicewood Tx
It nice to see and hear the great job Bob Lloyd did setting up our Raylar kit on your motor! Looks awesome and sounds like it will streak! Congratulations! You should have some fun this season.
Best Regards,
Ray @ Raylar
Best Regards,
Ray @ Raylar
#3
Registered
Thread Starter
Join Date: Feb 2005
Location: Southern Minnesota
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Re: FTM Spicewood Tx
Thanks Ray .......I leave Minnesota this Wed to go get it .....We will run it some on Lake travis before we bring it home............
You gonna Guarante me 85MPH ?????????????????HEHEHE
You gonna Guarante me 85MPH ?????????????????HEHEHE
#5
Registered
Thread Starter
Join Date: Feb 2005
Location: Southern Minnesota
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Re: FTM Spicewood Tx
Bob Lloyd of Full Throttle Marine took it out yesterday and was able to get 72.8 MPH out of it......He was at 5100 RPM and the limiter is set at 5400 so if I get the Prop reworked I would think I can get 73.5 and closer to that 5400RPM
#6
Registered
Join Date: Dec 2000
Location: Austin, Texas
Posts: 6,986
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
Join Date: Oct 2000
Location: Spicewood, Texas USA
Posts: 1,382
Likes: 0
Received 3 Likes
on
2 Posts
Re: FTM Spicewood Tx
I just finished getting a good dyno run on this engine. We made 492.7 HP at 5170 RPM. This is measured at the prop with everything installed in the boat ready to run. Even had the hatch closed.