|
Re: Rtech Supercharged Bulldog 540 ... 850 HP!
Originally Posted by tomcat
I picked up the dyno printout today. These are the observed HP numbers at a blower inlet temp of 90F.
Thats is a nice curve!!! Congrats. That will be a strong runner in that boat. Rob :drink: |
Re: Rtech Supercharged Bulldog 540 ... 850 HP!
Thanks Rob. We did not go above 5400 because of the stock valvetrain. The dyno boost gauge wasn't working properly but 7 psi is typical for this setup.
Did you get your new drives yet? |
Re: Rtech Supercharged Bulldog 540 ... 850 HP!
Originally Posted by tomcat
Thanks Rob. We did not go above 5400 because of the stock valvetrain. The dyno boost gauge wasn't working properly but 7 psi is typical for this setup.
Did you get your new drives yet? No :( But Dean loaned me some to use ,Lucky there!!! I been fighting water leaks with them. I ran the hole TickFaw poker run with water in it :eek: I tore it down last night it looks like it didn't hurt it .I believe in that Amsoil.I Resealed it ,I hope to be good for a while . I am hoping to get the new drives in a week or 2 .Maybe the new crescent lower will pick it up some with the new HP I have? I told Dean at the Bravo Shop today that at the Poker Run I turned it up to 11.5 lbs of boost on his loaner drives :eek: He didn't think it was funny :evilb: :evilb: Tom let us know how the boat runs. I would be curious as to what speed it picks it up.That's a lot of power in that boat.Should be fun :D Rob :drink: |
Re: Rtech Supercharged Bulldog 540 ... 850 HP!
I'd like to see pictures of how you fit that in there. 27 Fountains are tight with stock motors. :eek:
|
| All times are GMT -5. The time now is 01:45 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.