???s about pulling the motor
06-04-2006, 05:45 PM
#1
Registered User
Thread Starter
Join Date: Dec 2002
Location: Virginia Beach, Va
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
???s about pulling the motor
I have a Baja with 502s and need to pull the STBD motor. I think it needs bearings and an oil pump. At least that is all I hope it needs.
1-What is there to pulling the engine? Is there a write up on the net somewhere? Or a good book that coves it?
2-What to use to get the motor out of the boat?
3-Specs somewhere on torgue specs and stuff to put the new bearings in? Also where to get the parts?
1-What is there to pulling the engine? Is there a write up on the net somewhere? Or a good book that coves it?
2-What to use to get the motor out of the boat?
3-Specs somewhere on torgue specs and stuff to put the new bearings in? Also where to get the parts?
06-04-2006, 08:27 PM
#2
Registered
Join Date: Apr 2004
Location: ma,
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Re: ???s about pulling the motor
