Python Powerboats - help in Cinci??
#1
Registered
Thread Starter
Python Powerboats - help in Cinci??
Is this a Pantera Splash??
I found a 24' and kinda like it.
Anyone in the Cinci area want to give me hand checking this thing out?
I'll admit, I don't know what all to look for, and could use some help.
Boat has almost 1000 hrs, but "supposedly" they dropped a new motor in it.
It's a little rough, but nothing that would make me walk away.
Birdog, Byron, Allen, I need some help here!!
I need to get back on the water!!!
I found a 24' and kinda like it.
Anyone in the Cinci area want to give me hand checking this thing out?
I'll admit, I don't know what all to look for, and could use some help.
Boat has almost 1000 hrs, but "supposedly" they dropped a new motor in it.
It's a little rough, but nothing that would make me walk away.
Birdog, Byron, Allen, I need some help here!!
I need to get back on the water!!!
#2
Registered
Re: Python Powerboats - help in Cinci??
Originally Posted by bouyhunter
Is this a Pantera Splash??
I found a 24' and kinda like it.
Anyone in the Cinci area want to give me hand checking this thing out?
I'll admit, I don't know what all to look for, and could use some help.
Boat has almost 1000 hrs, but "supposedly" they dropped a new motor in it.
It's a little rough, but nothing that would make me walk away.
Birdog, Byron, Allen, I need some help here!!
I need to get back on the water!!!
I found a 24' and kinda like it.
Anyone in the Cinci area want to give me hand checking this thing out?
I'll admit, I don't know what all to look for, and could use some help.
Boat has almost 1000 hrs, but "supposedly" they dropped a new motor in it.
It's a little rough, but nothing that would make me walk away.
Birdog, Byron, Allen, I need some help here!!
I need to get back on the water!!!
#4
Registered
Thread Starter
Re: Python Powerboats - help in Cinci??
Originally Posted by ITLLFLI
Is it a local one? new paint, motor ect...? PM me your number and we might be ble to go check her out this week.
It's in Florence.
Looks pretty tight, Bravo I, drive shower, Gaffrig controls.
Needs a dash update, hydraulic steering, and maybe K-Planes.
I was "knocking" all around it, and it sounded solid and dry.
It's looks like a an old Cig Mistress, just 10' shorter.
white, with gold and purple flames facing forward.
If you have some time, It'd be great to hook up with ya to take a look .
Sent ya a PM with my numbers.
#6
Registered
Thread Starter
Re: Python Powerboats - help in Cinci??
Originally Posted by TRICK
Pythons were built in Georgia by Jim Clark. I believe I read here on OSO that Jim recently passed away.
I'm not sure of the origins of the hull but it did look like the Pantera/Jaws/Superboat hull.
There's a bunch of them running around Lake Lanier.
I'm not sure of the origins of the hull but it did look like the Pantera/Jaws/Superboat hull.
There's a bunch of them running around Lake Lanier.
If I buy this one, me and you are going to become really good freinds.
Don't go shopping for jet planes again
It's gonna need some major dashboard uogrades, we'll see how far I can push the budget.
#7
Registered
Re: Python Powerboats - help in Cinci??
Originally Posted by bouyhunter
Yeah, it's local. It was traded in on a Bass boat, and the dealer doesn't really know anything about it - nor do I.
It's in Florence.
Looks pretty tight, Bravo I, drive shower, Gaffrig controls.
Needs a dash update, hydraulic steering, and maybe K-Planes.
I was "knocking" all around it, and it sounded solid and dry.
It's looks like a an old Cig Mistress, just 10' shorter.
white, with gold and purple flames facing forward.
If you have some time, It'd be great to hook up with ya to take a look .
Sent ya a PM with my numbers.
It's in Florence.
Looks pretty tight, Bravo I, drive shower, Gaffrig controls.
Needs a dash update, hydraulic steering, and maybe K-Planes.
I was "knocking" all around it, and it sounded solid and dry.
It's looks like a an old Cig Mistress, just 10' shorter.
white, with gold and purple flames facing forward.
If you have some time, It'd be great to hook up with ya to take a look .
Sent ya a PM with my numbers.
#8
Re: Python Powerboats - help in Cinci??
back in the mid to late 90's I looked at a few Pythons. You really need to go over these boats with a fine tooth comb and get it professionally surveyed! Trust me get it surveyed..lots of wood in these boats!
#9
Registered
Join Date: Oct 2004
Location: franklin,Tenn.
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Re: Python Powerboats - help in Cinci??
Since the death of Jim Clark the molds for the python have been sold to Tom Nabbers who owns capt.Nabbers marine repair. He is located in Morris Ill. He is very well known in the area around Ill and the midwest for excellent custom and repair works. He is planning to build a 24 30 34.
#10
Registered
Thread Starter
Re: Python Powerboats - help in Cinci??
Thanks for the info everyone.
So, build quality? Sounds hit-or-miss from what you're telling me so far.
This one seemed solid - I was jumping up and down on the deck, and it didn't even flex.
I did note some spiderweb gel cracks on the hull - where the hull is meeting the transom. Didn't look bad, just something to be adressed.
I've been trying to get a phone call to GlassDave all day, but he must have changed his cell-phone.
Byron - Give me a call. I could use some help on this one.
So, build quality? Sounds hit-or-miss from what you're telling me so far.
This one seemed solid - I was jumping up and down on the deck, and it didn't even flex.
I did note some spiderweb gel cracks on the hull - where the hull is meeting the transom. Didn't look bad, just something to be adressed.
I've been trying to get a phone call to GlassDave all day, but he must have changed his cell-phone.
Byron - Give me a call. I could use some help on this one.