Toe In /toe Out ?????
 

Need some info regarding the toe in / toe out setting for the drives on the boat. Called Fountain today but missed the person I needed to talk to about this. Would like to check before launching.

1999 35 Fountain Lightning
Standard Bravos at regular factory X dimension
Props are turning in

Would like to know in or out, and how much. Thanks in advance !

Re: Toe In /toe Out ?????
 

how about straight????

Re: Toe In /toe Out ?????
 

I think they need to be toed in a little, just not positive.

Re: Toe In /toe Out ?????
 

In a 1/4". If your going to take Speed Racer you need your set-up perfect. :drink:

Re: Toe In /toe Out ?????
 

Crap- I thought this thread was about camel toe!!! :chimp:

Re: Toe In /toe Out ?????
 

definitely in than :D

Re: Toe In /toe Out ?????
 

Is this the same if the props turn out?

Re: Toe In /toe Out ?????
 

I change my answer, >1inch! :drink:

Re: Toe In /toe Out ?????
 

toe out....about an 1/8 inch.

Re: Toe In /toe Out ?????
 

is that what happens when you know you are going to break down if you start up the enines? You get a tow in and a tow out? :D

Okay, after the smart azz comment, someone please explain what toe in/out is... thanks...