External Steering
07-07-2006, 10:33 PM
#1
Gold Member
Gold MemberThread Starter
External Steering
I see the new 35' Formula Sport Fast Tech's going out the door with 496 HO's ...and a tie bar..no external steering...it's a 9,500lb boat..maybe on GPS 74mph...asking for trouble without external steering or would the above combo work?
My guess is the average guy is fine with this set-up or Formula would not be producing them in the quantities they are currently at.
What is to be lost without external steering? What parameters make it mandatory if they exist?
My sources tell me a good Lathem tie bar will keep the drives tight even with that weight and size of a boat. Some say no.
The ext steering can be had but the wait is several months..
Nice price too of $169k.
My guess is the average guy is fine with this set-up or Formula would not be producing them in the quantities they are currently at.
What is to be lost without external steering? What parameters make it mandatory if they exist?
My sources tell me a good Lathem tie bar will keep the drives tight even with that weight and size of a boat. Some say no.
The ext steering can be had but the wait is several months..
Nice price too of $169k.
Last edited by Hydrocruiser; 07-07-2006 at 10:36 PM.
07-08-2006, 11:16 AM
#2
The BAD Guy
Platinum Member
Re: External Steering
Just my opinion(and you know there like a$$holes 
).
I would definitely want it on if is was my boat. If its stopping you from buying the boat I would say buy it and see how it runs and/or add it after the fact.
).I would definitely want it on if is was my boat. If its stopping you from buying the boat I would say buy it and see how it runs and/or add it after the fact.
07-08-2006, 03:02 PM
#3
www.sunriseuph.com
Platinum Member
Join Date: Mar 2004
Location: Lake of the Ozarks, MO 38 MM
Posts: 599
Likes: 0
Received 0 Likes
on
0 Posts
Re: External Steering
Personally I think any boat capable of over 70MPH ought to have external steering. Something breaks or comes loose with mechanical at speed and and boat will make a hard turn on you. I know, mine did it but was't going that fast. Could have been disasterous. If something goes wrong with hydraulic at least it won't turn and throw you out. Of course can be added to any boat.
07-08-2006, 03:32 PM
#4
Gold Member
Gold Member
Re: External Steering
Mercruiser(now called Mercury Marine), has always recommended, in print, in their marine accessories catalogs, that a tie-bar be used on any twin sterndrive application above 60 m.p.h. They refer customers to Latham Marine & Marine Machine for these tie-bars, as Mercruiser has never sold them themselves, for liability reasons. Common sense would also dictate here. Yes, external hydraulic steering above 70 would be great, even for recreational use. Ed
Last edited by Ed; 07-08-2006 at 03:40 PM.
07-08-2006, 08:17 PM
#5
Gold Member
Gold MemberThread Starter
Re: External Steering
Originally Posted by Ed
Mercruiser(now called Mercury Marine), has always recommended, in print, in their marine accessories catalogs, that a tie-bar be used on any twin sterndrive application above 60 m.p.h. They refer customers to Latham Marine & Marine Machine for these tie-bars, as Mercruiser has never sold them themselves, for liability reasons. Common sense would also dictate here. Yes, external hydraulic steering above 70 would be great, even for recreational use. Ed
Cool...so as I am not one to go over 70mph...don't race or run hard...usually cruise at 45-65mph...with the Lathem tie bar I am good to go.
07-08-2006, 10:15 PM
#7
Gold Member
Gold MemberThread Starter
Re: External Steering
Originally Posted by 32storm
For weight & power of that boat, I would want external steering. It will save a lot of wear & tear on your gimbal rings.
07-10-2006, 07:55 AM
#8
Gold Member
Gold Member
Re: External Steering
Originally Posted by 32storm
For weight & power of that boat, I would want external steering. It will save a lot of wear & tear on your gimbal rings.
Charter Member
Thread
Thread Starter
Forum
Replies
Last Post
SmallPP
General Q & A
1
08-07-2007 09:23 PM
