how much oil press is too much
#4
Gold Member
Gold Member
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
Re: how much oil press is too much
I Think To Much Pressure Is Horsesheet,under A 100 Is Fine I Run 80-85 Cold And 60 -65 At Wot.........and Most Of The Time It Is Wot............
#6
Registered
Join Date: Aug 2005
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much oil press is too much
I have the blue spring in the pump. Main and rod clearances are at mercury recomended minimum,new cam bearings. I guess the gauge could be off, can check with mechanical. Would you see pressure surging as relief spring
popped off and on?
Thanks
popped off and on?
Thanks
#7
Re: how much oil press is too much
Heres a little info on pumps in this thread
http://www.offshoreonly.com/forums/s...t=500efi+build..
All my electric sending unit gages I have cked are off. Even after sending my Livorsi fuel pressure gages and senders back to Livorsi to get calibrated to the senders $$$$$. One is off 14PSI the other one is 6 psi off. I just use them as a reference to see if there is a prob now.
http://www.offshoreonly.com/forums/s...t=500efi+build..
All my electric sending unit gages I have cked are off. Even after sending my Livorsi fuel pressure gages and senders back to Livorsi to get calibrated to the senders $$$$$. One is off 14PSI the other one is 6 psi off. I just use them as a reference to see if there is a prob now.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#8
Registered
Join Date: Nov 2001
Location: Pennsylvania
Posts: 3,385
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much oil press is too much
That's right strip poker. Excess pressure is dumped out the pressure relief. The more over the pressure limit the more oil dumped. The problem in my limited opinion is that this dumped oil drops directly out of the pump and back down to the pickup area. This oil goes around and around getting hotter and hotter thereby possibly cause oil temp issues. That is my take on too much oil pressure. Ideal is probably a little over pressure relief cold to help build temp, then a little under that value hot. Over the pressure relief value hot would be a problem.
BT
BT
#9
Re: how much oil press is too much
Originally Posted by blue thunder
That's right strip poker. Excess pressure is dumped out the pressure relief. The more over the pressure limit the more oil dumped. The problem in my limited opinion is that this dumped oil drops directly out of the pump and back down to the pickup area. This oil goes around and around getting hotter and hotter thereby possibly cause oil temp issues. That is my take on too much oil pressure. Ideal is probably a little over pressure relief cold to help build temp, then a little under that value hot. Over the pressure relief value hot would be a problem.
BT
BT
another thing I tought about the more oil being bypassed is getting aerated and slung around ,so double the HP lost,
Also the way mine is set if real loose on bearing clearance its slinging more oil around,low oil pressure but Ive got that cushion, also a good oil pan. I guess there's always a trade off.Like some professional engine builders told me I am over thinking the oil system on a BBC, They said they work fine asis,but it cant hurt
I had a SBC drag motor with high oil press once 90 cold it broke a Moroso Dist hold down clamp stud, the resistance just pushed the dist out Maybe that's why the make better oil pump drive shafts
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.