High speed hatch ram
Which ones have you had good luck with??
Looking to replace the hatch lift on my .38 Special.. its reeeeeeaaaaaaaaaaal slooooooooooooooooooow :p Suggestions??? |
Re: High speed hatch ram
Eddies Marine looked like a good one ,but there discontinued it, I just bought one from cp performance ,I am dissatisfied in the quality,not marine friendly.
I took some picks of the inside if you want to build one. also do a search there are threads on how to make them in the tech section |
Re: High speed hatch ram
http://www.livorsi.com/catalog/trim_...HATCH_ACTUATOR
Which I believe are the ones Fred carries :drink: |
Re: High speed hatch ram
I just went Thur all this B.S. with my nor tech these electric rams are not the way.... i had 3 different screw type rams on mine it broke ever one of them....my hatch is very heavy and has a bad angle.. so i changed my two rams to two hyd units from apimarine 900# lift per ram what use to take 35 seconds now takes less than 5 it is unbelievable.. you can buy these rams at just a little more than the screw type and they are much smaller.... www.apimarine.com. good luck
|
Re: High speed hatch ram
1 Attachment(s)
Originally Posted by Strip Poker 388
Eddies Marine looked like a good one ,but there discontinued it, I just bought one from cp performance ,I am dissatisfied in the quality,not marine friendly.
I took some picks of the inside if you want to build one. also do a search there are threads on how to make them in the tech section |
Re: High speed hatch ram
There is another thread in the OSO news forum about hatch lifts . Just sme more info I have been talking about this for god knows how long
|
All times are GMT -5. The time now is 07:29 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.