Donkey D!ck Pictures
#1
VIP Member
VIP Member
Thread Starter
Donkey D!ck Pictures
Anyone have any transom shots of boats with Donkey Dicks?
I've searched around and can't find any... Curious how they look.
Thanks.
I've searched around and can't find any... Curious how they look.
Thanks.
#2
Re: Donkey D!ck Pictures
Originally Posted by drypipetiger
Anyone have any transom shots of boats with Donkey Dicks?
I've searched around and can't find any... Curious how they look.
Thanks.
I've searched around and can't find any... Curious how they look.
Thanks.
I have no idea what you are talking about.
#4
Platinum Member
Platinum Member
Re: Donkey D!ck Pictures
Here's some custom made by CMI behind a Cig / Rough Rider, those are 5" in diameter...Fred/Trick Marine is getting me a pair as we speak, I guess we could call Fred... Tricky Dick...
The crap you have to buy when you don't have a 3' swim platform that ends underwater at the deck joint to muffle the sounds of your mills!!!
The crap you have to buy when you don't have a 3' swim platform that ends underwater at the deck joint to muffle the sounds of your mills!!!
#6
Platinum Member
Platinum Member
Re: Donkey D!ck Pictures
Here is the ones Gibson make in 4" and 4.5" in diameter, unfortunatly no 5" in diameter as you need...
Hope this helps...
http://www.gibsonmarine.com/turndowns.html
Hope this helps...
http://www.gibsonmarine.com/turndowns.html
#7
Platinum Member
Platinum Member
Re: Donkey D!ck Pictures
Originally Posted by drypipetiger
Anyone have any transom shots of boats with Donkey Dicks?
#8
Platinum Member
Platinum Member
Re: Donkey D!ck Pictures
More information from their site. Passed advert. says available in 5" but I would not chance the lenght. I would rather custom cut to make sure all works.
#9
Platinum Member
Platinum Member