Offshoreonly.com - What's the story on this MTI?

Page 4 of 4

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - What's the story on this MTI? (https://www.offshoreonly.com/forums/general-boating-discussion/137098-whats-story-mti.html)

Sean H

10-29-2006 05:12 PM

Re: What's the story on this MTI?

Quote:

Originally Posted by 3600cat

I guess your talking about 99% of the high performance boats in the world. :evilb:

is that why marine engines blow up so much?

WeaponX

10-29-2006 05:17 PM

Re: What's the story on this MTI?

Quote:

Originally Posted by Sean H

is that why marine engines blow up so much?

Must be but when the other option is a worthless Ford what can you do but run the best. :D :evilb:

Wobble

10-30-2006 10:12 AM

Re: What's the story on this MTI?

Quote:

Originally Posted by super termoli

Looks like Trimax surface drives with supporting struts removed or not mounted yet. In any case, Tommy Bahama had Trimax.

I'm guessing the engines are based on the 6.2-liter block. Twin turbo, intercooler, 5000RPM, 1000hp and therefore probably huge boost pressure... I would dearly love to see this work but I don't quite see how it could. Or at least not with reliability and economy that one would normally expect from diesel engines.

Anyhow, it's nice to see people trying new things and fingers crossed.

Sounds a lot like Gale Banks twin turbo Duramax setup. I think they flatlined the dyno at 1200 foot pounds, dont know if they reached the 5K target rpm goal, 700+hp

44MTI

10-30-2006 11:20 AM

Re: What's the story on this MTI?

Quote:

Originally Posted by JIMKID Motorsports

i will have to talk to him on monday just relax guys i think the specs on the truck motors were like 500 torque 385 hp thinking not sure

I think your about HALF right. :evilb:

Strip Poker 388

10-30-2006 12:10 PM

Re: What's the story on this MTI?

I wonder how much difference in weight it is over a standard motor configuration.It has to be a lot heaver?

44MTI

10-30-2006 01:15 PM

Re: What's the story on this MTI?

I think the weights are pretty close to each other. Less than a blown big big block I think.

Strip Poker 388

10-30-2006 04:22 PM

Re: What's the story on this MTI?

Quote:

Originally Posted by 42MTI

I think the weights are pretty close to each other. Less than a blown big big block I think.

I guess like a PSI with the stacked innercooler.it will be a interresting to see how it does!!

WeaponX

10-30-2006 07:13 PM

Re: What's the story on this MTI?

Quote:

Originally Posted by 42MTI

I think your about HALF right. :evilb:

Sort of like being "Half fast". :D :D :evilb:

schnydo

11-01-2006 07:06 PM

Re: What's the story on this MTI?

The Engineer Is From Banks

All times are GMT -5. The time now is 04:23 PM.

Page 4 of 4

« First

Show 40 post(s) from this thread on one page