Offshoreonly.com - Drive Actuator Help

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Drive Actuator Help (https://www.offshoreonly.com/forums/general-boating-discussion/138590-drive-actuator-help.html)

gripit

08-22-2006 12:29 PM

Drive Actuator Help

Are the actuators attached to the drives in thepicture Mercury? If so, does anybody know the procedure to attach the cable into the actuator?

BROWNIE

08-22-2006 02:20 PM

Re: Drive Actuator Help

Take the nut off the front of the tube. There is a "C" shaped washer under it. Slide the notch of the Morse cable into the notch in the C washer. Screw the tube nut back on. That's it.....

All times are GMT -5. The time now is 07:15 PM.