Newport - Ylw. DONZI SINKS AT DRY DOCK
#21
Guest
Posts: n/a
TANK ... Your such a kiss ass man....
First, I see your letter to the editor in Powerboat.... Then you want my boat ! ....
No prob bro.... !!!
Hey Tank & Gar... If the weather permits this weekend... I say a Yardhouse Run could be in order.....Its gotta be Sunny & near 70 though.... TANK OWES BIG TIME !
Ciao,
Rick32
First, I see your letter to the editor in Powerboat.... Then you want my boat ! ....
No prob bro.... !!!
Hey Tank & Gar... If the weather permits this weekend... I say a Yardhouse Run could be in order.....Its gotta be Sunny & near 70 though.... TANK OWES BIG TIME !
Ciao,
Rick32
#23
Registered
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,709
Received 3,020 Likes
on
987 Posts
Rick, don't disrespect your poppy!!
And I believe you flaked the last time you were supposed to buy rounds brother! It's a little hard to boat for me right now when the motors out. I can row that thing around though! And of course Nort never calls unless he needs something!!!
So whats the rest of the story on the boat that sunk?? Any further??
Gary, did you service your boat yet? You know you should change the oil every once in a while, especially the way you run that thing!!!
OH and Jon, you get your ass out here and roll with us and then you can talk your crap foo!!
Tank
[ 01-22-2002: Message edited by: thisistank ]
And I believe you flaked the last time you were supposed to buy rounds brother! It's a little hard to boat for me right now when the motors out. I can row that thing around though! And of course Nort never calls unless he needs something!!!
So whats the rest of the story on the boat that sunk?? Any further??
Gary, did you service your boat yet? You know you should change the oil every once in a while, especially the way you run that thing!!!
OH and Jon, you get your ass out here and roll with us and then you can talk your crap foo!!
Tank
[ 01-22-2002: Message edited by: thisistank ]
#24
Member #2 ....Jeeezz
Charter Member
Join Date: Oct 2000
Location: Kicked to the curb
Posts: 2,345
Likes: 0
Received 0 Likes
on
0 Posts
Tank,
I haven't had it on the water yet this year. Right now, the props are in the shop, stern rails are at the powdercoater and dash trim is at the upholsterer. I've been re-wiring my trailer. I plan to change oil and plugs this weekend along with a good buff & wax.
Jon,
I'm getting close to deciding on the dash layout. I want to lay a Chart Plotter in the dash along with some Monster tachs and possibly use some of the dual indicator guages.
I'LL BE BACK
G
[ 01-22-2002: Message edited by: Cigarette 1 **** Original Member ]
I haven't had it on the water yet this year. Right now, the props are in the shop, stern rails are at the powdercoater and dash trim is at the upholsterer. I've been re-wiring my trailer. I plan to change oil and plugs this weekend along with a good buff & wax.
Jon,
I'm getting close to deciding on the dash layout. I want to lay a Chart Plotter in the dash along with some Monster tachs and possibly use some of the dual indicator guages.
I'LL BE BACK
G
[ 01-22-2002: Message edited by: Cigarette 1 **** Original Member ]
__________________
Look Fast *** Sold Sold Sold *** ... F2 Cigarette Top Gun in OSO Classifieds
Look Fast *** Sold Sold Sold *** ... F2 Cigarette Top Gun in OSO Classifieds
#27
Member #2 ....Jeeezz
Charter Member
Join Date: Oct 2000
Location: Kicked to the curb
Posts: 2,345
Likes: 0
Received 0 Likes
on
0 Posts
Sean,
No, this is my first Cig ... absolutly no regrets. I've had it almost 3 years now. I haven't seen much change in the prices ... I financed 100% and I am still in a good position. I did have to rebuild both engines after about 150 hours of hard running but I expected that. I think I have my mechanicals sorted out, now I'll focus on cosmetics.
http://www.scopeinfo.com/images/2001...e/P0002222.jpg
No, this is my first Cig ... absolutly no regrets. I've had it almost 3 years now. I haven't seen much change in the prices ... I financed 100% and I am still in a good position. I did have to rebuild both engines after about 150 hours of hard running but I expected that. I think I have my mechanicals sorted out, now I'll focus on cosmetics.
http://www.scopeinfo.com/images/2001...e/P0002222.jpg
__________________
Look Fast *** Sold Sold Sold *** ... F2 Cigarette Top Gun in OSO Classifieds
Look Fast *** Sold Sold Sold *** ... F2 Cigarette Top Gun in OSO Classifieds
#29
Charter Member #232
Charter Member
Garry I will be out there some time soon. Still waiting for Rick and Nort to figure out what they want and then I will make the plans. I am thinking Late Feb, Early March. I would love to work on something cool for the boat, and frankly the guy that has the CNC machine is DESPRATE for work. Machine work out east is really slow now, so it could be a good time to jump on it.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!