The Fountain Beak - Why?
#102
Registered
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
Something about the 399 from Skater and making it a faster better riding 43....Ya never know?
Last edited by Back4More; 02-09-2011 at 11:42 AM.
#103
Allergic to Nonsense
Platinum Member
Join Date: Aug 2001
Location: Granite Quarry, NC
Posts: 5,011
Likes: 0
Received 17 Likes
on
17 Posts
I guess it was..... That was about a 70 mph rig and faster than any Offshore hull in that era. (The smaller cats were a little faster and the Wings were much quicker). The "speed secret" that Allison had over 16 foot Glastrons and CHeckmates of the time was the pad, of course, and the fact that the beak and sheer line overlap allowed a 16 foot deck to be put on a 14 foot hull.... which of course meant you were balancing twin engines on a very small footprint.
The funny thing is that with twin RH lowers she obviously wanted to chine walk, but you could pick up a rhythm and make subtle adjustments with your wrists and forearms on the wheel in straightaways to "catch" the oscillations before they increased in scope and magnitude. Today I see guys "sawing" like lumberjacks and wonder what the h*ll they're doing? The "scale speed" on that hull at 70 was basically the equivalent of 140 mph in a 32 foot hull (28 foot excluding the beak)......so the "sawing" isn't about higher speeds. My later experiences racing vees with counter rotation reduced the need for wheel work even more.
Is it possible that some folks think it looks "cool" to whip a steering wheel back and forth?
P.S. all bets are off when discussing "lawn darts".....
T2x
The funny thing is that with twin RH lowers she obviously wanted to chine walk, but you could pick up a rhythm and make subtle adjustments with your wrists and forearms on the wheel in straightaways to "catch" the oscillations before they increased in scope and magnitude. Today I see guys "sawing" like lumberjacks and wonder what the h*ll they're doing? The "scale speed" on that hull at 70 was basically the equivalent of 140 mph in a 32 foot hull (28 foot excluding the beak)......so the "sawing" isn't about higher speeds. My later experiences racing vees with counter rotation reduced the need for wheel work even more.
Is it possible that some folks think it looks "cool" to whip a steering wheel back and forth?
P.S. all bets are off when discussing "lawn darts".....
T2x
#104
Registered
Join Date: Jun 2010
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
From Trulio's interview a couple weeks ago: http://boatermouth.com//index.php?vi...ntent&Itemid=8
#105
Registered User
Gold Member
Join Date: Apr 2007
Location: prince george,va
Posts: 1,474
Likes: 0
Received 0 Likes
on
0 Posts
I guess it was..... That was about a 70 mph rig and faster than any Offshore hull in that era. (The smaller cats were a little faster and the Wings were much quicker). The "speed secret" that Allison had over 16 foot Glastrons and CHeckmates of the time was the pad, of course, and the fact that the beak and sheer line overlap allowed a 16 foot deck to be put on a 14 foot hull.... which of course meant you were balancing twin engines on a very small footprint.
The funny thing is that with twin RH lowers she obviously wanted to chine walk, but you could pick up a rhythm and make subtle adjustments with your wrists and forearms on the wheel in straightaways to "catch" the oscillations before they increased in scope and magnitude. Today I see guys "sawing" like lumberjacks and wonder what the h*ll they're doing? The "scale speed" on that hull at 70 was basically the equivalent of 140 mph in a 32 foot hull (28 foot excluding the beak)......so the "sawing" isn't about higher speeds. My later experiences racing vees with counter rotation reduced the need for wheel work even more.
Is it possible that some folks think it looks "cool" to whip a steering wheel back and forth?
P.S. all bets are off when discussing "lawn darts".....
T2x
The funny thing is that with twin RH lowers she obviously wanted to chine walk, but you could pick up a rhythm and make subtle adjustments with your wrists and forearms on the wheel in straightaways to "catch" the oscillations before they increased in scope and magnitude. Today I see guys "sawing" like lumberjacks and wonder what the h*ll they're doing? The "scale speed" on that hull at 70 was basically the equivalent of 140 mph in a 32 foot hull (28 foot excluding the beak)......so the "sawing" isn't about higher speeds. My later experiences racing vees with counter rotation reduced the need for wheel work even more.
Is it possible that some folks think it looks "cool" to whip a steering wheel back and forth?
P.S. all bets are off when discussing "lawn darts".....
T2x
#106
Registered
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
One of the first two boats is a "greatly enhanced and up-tuned" version of the 42. The other is a CC.
From Trulio's interview a couple weeks ago: http://boatermouth.com//index.php?vi...ntent&Itemid=8
From Trulio's interview a couple weeks ago: http://boatermouth.com//index.php?vi...ntent&Itemid=8
#109
Platinum Member
Platinum Member
Join Date: Jun 2005
Location: Tulsa, Oklahoma / GLOC
Posts: 3,376
Received 0 Likes
on
0 Posts