Any GM CRATE MOTOR sellers on the board?
#2
VIP Member
VIP Member
Re: Any GM CRATE MOTOR sellers on the board?
Originally Posted by dean51267
Need some general info, thanks...
#6
VIP Member
VIP Member
Re: Any GM CRATE MOTOR sellers on the board?
Originally Posted by ExcaliburHawk40
I can make you a deal on GM engines. Let me know what you need.
#7
Platinum Member
Platinum Member
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,730
Received 370 Likes
on
249 Posts
Re: Any GM CRATE MOTOR sellers on the board?
I'm a Canadian GM dealer. Let me know exactly what you are looking for, we'll see if our canadian price is cheaper than U.S price! Looking for the 620 HP package or 720 ?
#8
Registered
Thread Starter
Join Date: Jan 2005
Location: Paducah, KY
Posts: 4,601
Likes: 0
Received 0 Likes
on
0 Posts
Re: Any GM CRATE MOTOR sellers on the board?
I am loking for input on a 454 HO, 420 hp motor.
Basically how do I get to GM with a complaint? I think a resaller is trying to screw me.
Basically how do I get to GM with a complaint? I think a resaller is trying to screw me.
#9
Registered
Join Date: Jul 2006
Location: Loretto, Ontario
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Re: Any GM CRATE MOTOR sellers on the board?
Jeff32
I just got priced two very different set of prices to rebuild my 420's for my F311. Both shops that have been in the business for quite a while. I have excellent references for both. In / Out was quoted $2,000 + full rebuild to spec, a cam bump, new valves, springs, balanced etc. Whole ball of wax. One rebuild was for $20,000 the other for $12,000 cdn. (this guy I personally know). The first offers a one season warranty but is still pretty pricy the other is an out the door and if there is a problem with the motor we will discuss as it is a race motor. Both will be run but not dynode and tested previous to installation and then installed and gone over. Both guys know there stuff.
Question - How much for 420’s crated with warranty from GM? Are these similar to the ’89 merc version with the Crane roller top end? Would you forward a link on any information related to GM? I am out of Alliston.
Trevor
I just got priced two very different set of prices to rebuild my 420's for my F311. Both shops that have been in the business for quite a while. I have excellent references for both. In / Out was quoted $2,000 + full rebuild to spec, a cam bump, new valves, springs, balanced etc. Whole ball of wax. One rebuild was for $20,000 the other for $12,000 cdn. (this guy I personally know). The first offers a one season warranty but is still pretty pricy the other is an out the door and if there is a problem with the motor we will discuss as it is a race motor. Both will be run but not dynode and tested previous to installation and then installed and gone over. Both guys know there stuff.
Question - How much for 420’s crated with warranty from GM? Are these similar to the ’89 merc version with the Crane roller top end? Would you forward a link on any information related to GM? I am out of Alliston.
Trevor