Wanted: Project Boat
 

looking for a 30 foot or bigger project boat????????????????????????

Re: Wanted: Project Boat
 

Something like this? I'll sell it cheap. :drink: :drink: :drink:

Re: Wanted: Project Boat
 

:D :D :D :D

Re: Wanted: Project Boat
 

Here's a couple i found on ebay:

http://cgi.ebay.com/ebaymotors/HIgh-...QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/1989-...QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/WELLC...QQcmdZViewItem

This boat looks like it was in a time capsule,30 original hours... :rolleyes:

Re: Wanted: Project Boat
 

This seems very affordable... :drink:


http://cgi.ebay.com/ebaymotors/2002-...QQcmdZViewItem

Re: Wanted: Project Boat
 

interested in this? it's stripped except for the bolsters and back seat (it has cables and other stuff in it, too).

the transom and the stringers in the engine compartment need to be replaced, I've got about 3/4 of the transom and part of the center stringer out.

Re: Wanted: Project Boat
 

How much of a project do you want? I have a 32 Excalibur with fresh rebuilds, good trs drives and good bw trannies. Hydraulic steering. Redid all the vinyl and carpet in the cockpit. Cabin was also recently redone. Just needs an updated dash and some tlc.

Re: Wanted: Project Boat
 

might have a F 35-7 100% stripped but have all parts.

Re: Wanted: Project Boat
 

I have a 1988 Chris Craft Stinger 312 (31'). Just needs valve job done on port engine. Starboard engine was just done along with new steering ram and cable. Motors are 1997 502s with HP500 intakes and carbs. 1997 Bravo drives as well. It's in the classifieds for 27K but make me an offer before I have to do the other valve job. Wife wants a "more quiet" single engine cruiser. :rolleyes:

Later,

CTA
http://www.offshoreonly.com/esvon/page-9385.html

Re: Wanted: Project Boat
 

I looked at your boat last weekend. If i didnt have my heart set on something else I would have bought it. Great boat for the price :cool:

http://www.offshoreonly.com/esvon/files/9385_4.jpg

Re: Wanted: Project Boat
 

Cool. Thanks. :drink:

Re: Wanted: Project Boat
 

I'll give you the name of the guy that worked on my engines last. Just purchase anything he has worked on and you have a project boat!

Re: Wanted: Project Boat
 

Might have? :confused:

Re: Wanted: Project Boat
 

Project boat....LMAO :evilb: ...

Re: Wanted: Project Boat
 

Arent they all projects? If not today tomorrow............

Re: Wanted: Project Boat
 

94 33' Powerplay $24K........http://www.offshoreonly.com/esvon/page-11590.html

Re: Wanted: Project Boat
 

Re: Wanted: Project Boat
 

Don't kow where you are, but speaking of Stingers......

There is a Chris Craft Stinger sitting on the side of the road on 82 just east of I35 in Gainsville Texas. It looks like it could use some TLC. I'd say just from the neglected looks, it's a project waiting to happen!