Wanted: Project Boat
#4
Registered
Join Date: Jan 2006
Location: Crownsville, MD
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wanted: Project Boat
Here's a couple i found on ebay:
http://cgi.ebay.com/ebaymotors/HIgh-...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/1989-...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/WELLC...QQcmdZViewItem
This boat looks like it was in a time capsule,30 original hours...
http://cgi.ebay.com/ebaymotors/HIgh-...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/1989-...QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/WELLC...QQcmdZViewItem
This boat looks like it was in a time capsule,30 original hours...
#5
Registered
Join Date: Jan 2006
Location: Crownsville, MD
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wanted: Project Boat
#6
Registered
iTrader: (1)
Join Date: Apr 2003
Location: Knoxville, TN
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wanted: Project Boat
interested in this? it's stripped except for the bolsters and back seat (it has cables and other stuff in it, too).
the transom and the stringers in the engine compartment need to be replaced, I've got about 3/4 of the transom and part of the center stringer out.
the transom and the stringers in the engine compartment need to be replaced, I've got about 3/4 of the transom and part of the center stringer out.
#7
Registered
Re: Wanted: Project Boat
How much of a project do you want? I have a 32 Excalibur with fresh rebuilds, good trs drives and good bw trannies. Hydraulic steering. Redid all the vinyl and carpet in the cockpit. Cabin was also recently redone. Just needs an updated dash and some tlc.
#9
Registered
Join Date: Oct 2001
Location: Palm City, FL
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wanted: Project Boat
I have a 1988 Chris Craft Stinger 312 (31'). Just needs valve job done on port engine. Starboard engine was just done along with new steering ram and cable. Motors are 1997 502s with HP500 intakes and carbs. 1997 Bravo drives as well. It's in the classifieds for 27K but make me an offer before I have to do the other valve job. Wife wants a "more quiet" single engine cruiser.
Later,
CTA
http://www.offshoreonly.com/esvon/page-9385.html
Later,
CTA
http://www.offshoreonly.com/esvon/page-9385.html
#10
Guest
Posts: n/a
Re: Wanted: Project Boat
Originally Posted by ctadams21
I have a 1988 Chris Craft Stinger 312 (31'). Just needs valve job done on port engine. Starboard engine was just done along with new steering ram and cable. Motors are 1997 502s with HP500 intakes and carbs. 1997 Bravo drives as well. It's in the classifieds for 27K but make me an offer before I have to do the other valve job. Wife wants a "more quiet" single engine cruiser.
Later,
CTA
http://www.offshoreonly.com/esvon/page-9385.html
Later,
CTA
http://www.offshoreonly.com/esvon/page-9385.html