anyone make a drive shower for 3a's?
 

have never seen one. do they exist? thx

Re: anyone amke adrive shower for 3a's?
 

Thought they didn't need one due to the trans circ oil!?

Re: anyone amke adrive shower for 3a's?
 

the drive oil i seperate from the trans oil

Re: anyone make a drive shower for 3a's?
 

Yes

Re: anyone amke adrive shower for 3a's?
 

Plumb your intercoolers to dump onto your drives like Kaama did.

Re: anyone amke adrive shower for 3a's?
 

i would think it better to use colder water that has not gone thru the intercooler. how hot is intercooler discharge water? thx

Re: anyone amke adrive shower for 3a's?
 

I don't think you need them. I have been running them for 5 years without and haven't had any problems. They hold over 4 gallons of oil each.

Re: anyone amke adrive shower for 3a's?
 

how much hp are you running what % of the time are your throttles pinned forward to the stops :D thx, rm

Re: anyone amke adrive shower for 3a's?
 

557's with 625+ HP, Huber 1200's, spinning 17.25x 28 4 blade cleavers. Sticks all the way down about 25% of the time.

Re: anyone amke adrive shower for 3a's?
 

The manual calls for 9.38 quarts with slight variences due to casting differences. Do you have some sort of external cooler that would account for the difference?