How Important
Are The Little Springs On The Bell Housing Motor Mounts?
|
Re: How Important
Ttt
|
Re: How Important
You don't use them with the new mounts.
|
Re: How Important
Originally Posted by bowtie
You don't use them with the new mounts.
|
Re: How Important
If your mounts are supposed to have them, they act as spacers to raise the rear of the engine to line up with the gimbal bearing. The big fiber washer is to keep contact from occurring if the cushion mount were to slip and the engine drops down.
|
Re: How Important
Additionally, they would dampen harmonics from the engine which could be transferred to the gimble housing. Since this housing is Al, I would be VERY wary of either fatigue cracking from high frequency,low amplitudes or catastrophic failure :eek: from low frequency/low instance elevated amplitudes leading to part failure. The prior is more likely.
The other posts above are also factors to keep the drive alignment correct... Zack |
All times are GMT -5. The time now is 02:53 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.