Offshoreonly.com - Paint or powder coat

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Paint or powder coat (https://www.offshoreonly.com/forums/general-boating-discussion/140511-paint-powder-coat.html)

tee4texas

09-15-2006 07:01 PM

Re: Paint or powder coat

Quote:

So in a nut shell you are saying not much defference in grippage between paint and powder?

correct - of course YMMV

2112	09-15-2006 11:14 PM

Re: Paint or powder coat

Quote:

Originally Posted by cuda

Aluminum doesn't rust. :)

Rust no, corrosion=yes.

cig1988

09-16-2006 04:27 AM

Re: Paint or powder coat

Quote:

Originally Posted by SLINGSHOT

thats why you use a primer.......last time i checked if you nick paint it rusts too? :evilb:

Absolutely it will. BUT if you use zinc chromate first it will prevent the rust from spreading. Nothing will last forever. It's just easier to refinish when it does fail.

scarrab30

09-16-2006 09:10 AM

Re: Paint or powder coat

Call march hi-performance, I did that and they set me rite up. I needed over sized pulleys to slow everything down. Brian

cuda	09-16-2006 12:32 PM

Re: Paint or powder coat

I do know that if the pc does chip, it starts coming off in rather large chunks. At least it did on my swim platform, which I'm sure was pc'd at the factory. I paint it where it comes off, and you really can't tell the difference.

R Addiction

09-16-2006 12:55 PM

Re: Paint or powder coat

Hey Rob.....Just buy my boat..... :D

SOX	09-16-2006 09:41 PM

Re: Paint or powder coat

I'll trade you straight up :D

R Addiction

09-16-2006 09:58 PM

Re: Paint or powder coat

Not sure if that will fly.........gotta ask the wife. :rolleyes:

All times are GMT -5. The time now is 11:32 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page