540 Efi motor
#1
Registered
Thread Starter
540 Efi motor
Can you make 700 foot pounds of torque on a 540 with 502mag fuel injection and stock heads.
#3
Registered
iTrader: (1)
Re: 540 Efi motor
Or without nitrous....
Or without a ton of compression......
If this is a trick question and you've already done it please show us proof and tell us how you did it.
Or without a ton of compression......
If this is a trick question and you've already done it please show us proof and tell us how you did it.
#4
Registered
Thread Starter
Re: 540 Efi motor
Well that really stinks!! I was possibly looking at gong the Natural Aspirated route.
So what kind of torque can you make with 10 to 1???
So what kind of torque can you make with 10 to 1???
#5
21 and 42 footers
Platinum Member
Re: 540 Efi motor
I'm getting ready to tear down a pair of 500EFI's using the stock Injection system (bigger injectors), aluminum heads, AND punching it out to 540's........I won't hit 700HP or TQ. (but hopefully close!!!!!!)
#6
Registered
Join Date: Nov 2003
Location: Middletown NY
Posts: 313
Likes: 0
Received 0 Likes
on
0 Posts
Re: 540 Efi motor
My carb 540 made 678 TQ and 667 HP
9 to 1 and a hyd cam with AFR heads
I'm sure there are guy's getting that 700 TQ with a little more compression and cam .
9 to 1 and a hyd cam with AFR heads
I'm sure there are guy's getting that 700 TQ with a little more compression and cam .
#8
Registered
Thread Starter
Re: 540 Efi motor
talon 25 what AFR heads are you using?
Last edited by baja27; 09-20-2006 at 08:35 PM.