TRS Out......Konrad In !
I broke down and bought a set of Konrads for my 1985 Cigarette mistress. I am in the process of installing them now. My motors put out between 650-675HP. I was spinning 25" mirage plus props before inward and they wound the motors to about 4900 RPM. I want to run the RPMs around 5300RPM. The Konrads are also 1.38" shorter and I purchased the ones with nose cones. I was thinking 4 blades. I also installed the drives to spin outward for docking purposes. Any suggestions on props? Experience with Konrads.
Anyone interested in some great parts for a TRS setup, freshwater low hours, here is a link.....no disapointments. http://search.ebay.com/trs-outdrive_W0QQfkrZ1QQfromZR8 |
Re: TRS Out......Konrad In !
You're going to need to post some pic's of the work in progress.
Let's see what ya got!! Sound's like the Mis' is a good candidate for this upgrade. Not sure if anyone else on the board has made the same conversion on this hull. My only question is why turning outward for docking?? - maybe I'm missing something - if so, please explain. |
Re: TRS Out......Konrad In !
I am going to try spinning them out. I hope I don't loose any speed. Docking the boat is challenging with them turning in. I was told it would be easier if they were turning out. I will be posting some pictures of the install. I have one on, and one ready to go. Weather here has been slowing down the process.
|
Re: TRS Out......Konrad In !
good choice i have heard they are bad azz drives if i had the money i would swap my #3 out for one...........i am still dialing it in know though.............good luck keep us posted
|
Re: TRS Out......Konrad In !
1 Attachment(s)
We love our Konrads. Doller Offshore did the conversion from Bravo"type" drives to the Konrad this past spring. They solved our problems.
|
Re: TRS Out......Konrad In !
I know I will be happy with the purchase, I just want to know where to start with props.
Anyone interested in some great parts for a TRS setup, freshwater low hours, here is a link.....no disapointments. http://search.ebay.com/trs-outdrive_W0QQfkrZ1QQfromZR8 |
Re: TRS Out......Konrad In !
24 0r 26 Bravo 1 four blades.
|
Re: TRS Out......Konrad In !
I agree, 24 or 26 Bravo 1 four blade. I'd start with the 24.
Are you going to test before winterizing? I think I'm done. Kurt |
Re: TRS Out......Konrad In !
Not going in the water, snow this weekend for me. I am finishing the install. I also need to buy props. Do I need special hubs for the Konrads or just the standard Bravo XR big shaft
|
All times are GMT -5. The time now is 10:32 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.