TRS Out......Konrad In !
#1
TRS Out......Konrad In !
I broke down and bought a set of Konrads for my 1985 Cigarette mistress. I am in the process of installing them now. My motors put out between 650-675HP. I was spinning 25" mirage plus props before inward and they wound the motors to about 4900 RPM. I want to run the RPMs around 5300RPM. The Konrads are also 1.38" shorter and I purchased the ones with nose cones. I was thinking 4 blades. I also installed the drives to spin outward for docking purposes. Any suggestions on props? Experience with Konrads.
Anyone interested in some great parts for a TRS setup, freshwater low hours, here is a link.....no disapointments.
http://search.ebay.com/trs-outdrive_W0QQfkrZ1QQfromZR8
Anyone interested in some great parts for a TRS setup, freshwater low hours, here is a link.....no disapointments.
http://search.ebay.com/trs-outdrive_W0QQfkrZ1QQfromZR8
#2
Registered
Re: TRS Out......Konrad In !
You're going to need to post some pic's of the work in progress.
Let's see what ya got!!
Sound's like the Mis' is a good candidate for this upgrade. Not sure if anyone else on the board has made the same conversion on this hull.
My only question is why turning outward for docking?? - maybe I'm missing something - if so, please explain.
Let's see what ya got!!
Sound's like the Mis' is a good candidate for this upgrade. Not sure if anyone else on the board has made the same conversion on this hull.
My only question is why turning outward for docking?? - maybe I'm missing something - if so, please explain.
#3
Re: TRS Out......Konrad In !
I am going to try spinning them out. I hope I don't loose any speed. Docking the boat is challenging with them turning in. I was told it would be easier if they were turning out. I will be posting some pictures of the install. I have one on, and one ready to go. Weather here has been slowing down the process.
#4
Gold Member
Gold Member
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,369
Likes: 0
Received 79 Likes
on
32 Posts
Re: TRS Out......Konrad In !
good choice i have heard they are bad azz drives if i had the money i would swap my #3 out for one...........i am still dialing it in know though.............good luck keep us posted
#5
Platinum Member
Platinum Member
Join Date: Mar 2004
Location: Hillsborough,NJ
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Re: TRS Out......Konrad In !
We love our Konrads. Doller Offshore did the conversion from Bravo"type" drives to the Konrad this past spring. They solved our problems.
Last edited by NJSONIC; 10-11-2006 at 07:16 PM.
#6
Re: TRS Out......Konrad In !
I know I will be happy with the purchase, I just want to know where to start with props.
Anyone interested in some great parts for a TRS setup, freshwater low hours, here is a link.....no disapointments.
http://search.ebay.com/trs-outdrive_W0QQfkrZ1QQfromZR8
Anyone interested in some great parts for a TRS setup, freshwater low hours, here is a link.....no disapointments.
http://search.ebay.com/trs-outdrive_W0QQfkrZ1QQfromZR8