1982 Excalbiur Hull ID Location
#1
Registered
Thread Starter
Join Date: Jun 2003
Location: Amherst Ohio
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
1982 Excalbiur Hull ID Location
A friend of mine is looking at a 24ft excalibur. The boat is a 1982 single engine TRS drive. The price is right but there is no Hull ID stamped in the transome of the boat.
Was this put in a different location on these boats?\
The boat is in Canada is it possiable they did not stamp it because Hull id's were not required in Canada?
If it was never given a hull ID what steps would need to be taked to get it an ID here in the states.
Thanks
Rob
Was this put in a different location on these boats?\
The boat is in Canada is it possiable they did not stamp it because Hull id's were not required in Canada?
If it was never given a hull ID what steps would need to be taked to get it an ID here in the states.
Thanks
Rob
#2
VIP Member
VIP Member
Re: 1982 Excalbiur Hull ID Location
we had one of these boats back in the 80's and the hull was stamped in the top right where it should be. I'm pretty sure ours was a 1980
#3
Registered
Thread Starter
Join Date: Jun 2003
Location: Amherst Ohio
Posts: 686
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1982 Excalbiur Hull ID Location
That's where I figured it should be. I wonder if it never had one or if someone filled it in for some reason. I told him he should have the owner start sanding the transome in the top right to look for it.