Offshoreonly.com - Who makes these types of shifters/throttles??

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Who makes these types of shifters/throttles?? (https://www.offshoreonly.com/forums/general-boating-discussion/145937-who-makes-these-types-shifters-throttles.html)

tony davis

11-28-2006 04:33 AM

Re: Who makes these types of shifters/throttles??

Steve Salmon in the UK manufactures what your looking for.

http://www.salmonpowersports.com/control_boxes.htm

As used by Nortech!

CIG3	11-28-2006 12:16 PM

Re: Who makes these types of shifters/throttles??

The controls are made by a company in Michigan. They are used on all Dragons. Very simple and robust. Peter uses them in most of the Skater race boats. They are about $275 per lever. PM me if you are interested.

Andy Bloom

Quote:

Originally Posted by Waterboy123

I am after a set of shifters, for a twin enigne boat and need a low profile pair that feed from the end, not the bottom.

Like the pair in the photo below

Can anyone tell me where I can buy these from and approx cost.

Thanks

Ryan Beckley

11-28-2006 12:30 PM

Re: Who makes these types of shifters/throttles??

Those are SKATER throttles 269-857-4308

Waterboy123

11-28-2006 02:11 PM

Re: Who makes these types of shifters/throttles??

Thanks guys, have made contact with one of the companies and will be placing an order shortly.

Thanks

All times are GMT -5. The time now is 03:37 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page