Who makes these types of shifters/throttles??
#1
Registered
Thread Starter
Who makes these types of shifters/throttles??
I am after a set of shifters, for a twin enigne boat and need a low profile pair that feed from the end, not the bottom.
Like the pair in the photo below
Can anyone tell me where I can buy these from and approx cost.
Thanks
Like the pair in the photo below
Can anyone tell me where I can buy these from and approx cost.
Thanks
#5
Registered
Re: Who makes these types of shifters/throttles??
We sell the Hardin Marine "Quick Draw" units they have the ability to be configured just like this with your choice of cable inlets.
#7
Re: Who makes these types of shifters/throttles??
we have a similar style in the race boat (actually they look the same as above). i believe they are marine machines. they work very well. i will check an see exactly what they are.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#9
Re: Who makes these types of shifters/throttles??
yep . . . here they are. i never really looked at the ones in the boat.
http://lathammarine.com/control-competitions.htm
http://lathammarine.com/control-competitions.htm
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#10
Registered
Thread Starter
Re: Who makes these types of shifters/throttles??
Thanks guys, any idea on pricing? also I need them to be able, to be feed from the front and the back in order to run two 300X's in counter rotation.
James
James