Bezel Question: Sony Round Remote
VIP Member
12-25-2006, 09:49 PM
#2
Re: Bezel Question: Sony Round Remote
Got mine from Livorsi. One thing you will have to do is to make a spacer that fits tightly inside the bezel, and drill 3 holes for the remote, 2 screw holes, 1cable hole. This will keep the remote centered in the bezel. Anything will work such as 1/8" plastic.
3 1/8 bezel 4" OD I'm pretty sure. I can double check mine as the boat is sitting in my garage if you really need to know. I do know the bezel is not the standard size.
http://www.livorsi.com/catalog/powde...tm#FLAT_BEZELS
3 1/8 bezel 4" OD I'm pretty sure. I can double check mine as the boat is sitting in my garage if you really need to know. I do know the bezel is not the standard size.
http://www.livorsi.com/catalog/powde...tm#FLAT_BEZELS
Last edited by US1 Fountain; 12-02-2011 at 11:14 AM.
12-25-2006, 10:16 PM
#3
OSO Moderator
Charter Member
Re: Bezel Question: Sony Round Remote
Brian,
WWW.danamarineproducts.com makes exactly what you are looking for:
http://www.danamarineproducts.com/st...TOKEN=11822794
WWW.danamarineproducts.com makes exactly what you are looking for:
http://www.danamarineproducts.com/st...TOKEN=11822794
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
12-25-2006, 10:42 PM
#5
Re: Bezel Question: Sony Round Remote
Well chit Brian, why didn't you just ask? 
and Thanks.
The Dana ones don't look to match the rest of the dash gauges profile. But it shows the hole pattern I mentioned.
Either way a huge improvement over the w/o look.
Whoops, just loooked at your dash pic up close. Looks to be a good match.
and Thanks. The Dana ones don't look to match the rest of the dash gauges profile. But it shows the hole pattern I mentioned.
Either way a huge improvement over the w/o look.
Whoops, just loooked at your dash pic up close. Looks to be a good match.
Last edited by US1 Fountain; 12-25-2006 at 10:46 PM.
12-25-2006, 11:34 PM
#6
Re: Bezel Question: Sony Round Remote
My depth finder has the bezel replaced, and I am going to order the bezel for the tattle tale as well. It should all look nice together.
Maybe speaker covers next; or painting the existing ones. Trouble is I through-bolted them for anti-theft. I've got one next to the throttles now, and these are going in soon:
Maybe speaker covers next; or painting the existing ones. Trouble is I through-bolted them for anti-theft. I've got one next to the throttles now, and these are going in soon:
Last edited by Sydwayz; 12-25-2006 at 11:43 PM.
12-26-2006, 09:00 AM
#10
Re: Bezel Question: Sony Round Remote
Originally Posted by Sydwayz
They are Purple.
I bought this from Trick this spring, but never installed it. I ended up making one that had a little different profile. Are you going to buy one or go w/o? I'll make ya a deal.
Last edited by US1 Fountain; 12-02-2011 at 11:14 AM.
