Notices

single v bottom with #6

Thread Tools
 
Old 01-01-2007, 04:06 PM
  #1  
Registered
Thread Starter
 
Join Date: Feb 2005
Location: Atlanta
Posts: 1,898
Likes: 0
Received 124 Likes on 57 Posts
Default single v bottom with #6

What is the smallest single engine v bottom you have seen with a #6 on the back? 27? 28? 30?

It seems that there are quite a few after 32 feet.
tomcei is offline  
Old 01-01-2007, 04:08 PM
  #2  
Driver-441
Racer
 
TeamSaris's Avatar
 
Join Date: Aug 2004
Location: Lake George
Posts: 11,846
Received 1,073 Likes on 283 Posts
Default Re: single v bottom with #6

I have seen two #6s on a 29 Scarab.
TeamSaris is offline  
Old 01-01-2007, 04:16 PM
  #3  
PF Marine
Platinum Member
 
Coolerman's Avatar
 
Join Date: Mar 2003
Location: Dallas, TX
Posts: 1,787
Received 22 Likes on 12 Posts
Default Re: single v bottom with #6

Originally Posted by tomcei
What is the smallest single engine v bottom you have seen with a #6 on the back? 27? 28? 30?

It seems that there are quite a few after 32 feet.
There is a guy on this board with a 30' checkmate I believe, has a turbo motor in it and runs 115mph+ with it.
Coolerman is offline  
Old 01-01-2007, 04:24 PM
  #4  
Driver-441
Racer
 
TeamSaris's Avatar
 
Join Date: Aug 2004
Location: Lake George
Posts: 11,846
Received 1,073 Likes on 283 Posts
Default Re: single v bottom with #6

What size Activator is Masher44's? I think that has a 6
TeamSaris is offline  
Old 01-01-2007, 04:29 PM
  #5  
Registered
 
TUFFboat's Avatar
 
Join Date: Oct 2004
Location: Cambridge, Ontario
Posts: 235
Likes: 0
Received 11 Likes on 2 Posts
Default Re: single v bottom with #6

I would be very interested in hearing how a small boat handled with a #6 compared to a bravo style out drive.
I have heard of a few guys going with BIG hp 1000-1100hp on small light boats (single vee) but I can't figure out how you would make it last without the big drive on it. The big #6 weighs like 500lbs and consumes hp just to run it.
So, has anyone got this handled?
TUFFboat is offline  
Old 01-01-2007, 04:32 PM
  #6  
Driver-441
Racer
 
TeamSaris's Avatar
 
Join Date: Aug 2004
Location: Lake George
Posts: 11,846
Received 1,073 Likes on 283 Posts
Default Re: single v bottom with #6

I would run a Konrad before a 6 if possible. Konrad said if they were not being conservative they would rate it at 1000HP.
TeamSaris is offline  
Old 01-01-2007, 04:39 PM
  #7  
Registered
 
JCPERF's Avatar
 
Join Date: Jul 2004
Location: Long Island,New York
Posts: 8,908
Received 9 Likes on 9 Posts
Default Re: single v bottom with #6

My boat and Masher's have #6s on the back.The problem isnt so much the HP drain, its the CG of the boat.When you go from the Bravo to the #6 it adds 320 lbs. to the back of the boat.The center of gravity now is much further back than with the Bravo.The handling characteristics might be jeopardized.
Attached Thumbnails single v bottom with #6-4064_17.jpg   single v bottom with #6-sharkey2.jpg  
JCPERF is offline  
Old 01-01-2007, 04:40 PM
  #8  
Registered
Thread Starter
 
Join Date: Feb 2005
Location: Atlanta
Posts: 1,898
Likes: 0
Received 124 Likes on 57 Posts
Default Re: single v bottom with #6

there arn't many used Konrads to pick up but there are a few #6
I'm mostly concerned with the weight and how it would effect a single boat around 27-30 weight approx 5800lbs formaly a bravo
tomcei is offline  
Old 01-01-2007, 04:42 PM
  #9  
Registered
Thread Starter
 
Join Date: Feb 2005
Location: Atlanta
Posts: 1,898
Likes: 0
Received 124 Likes on 57 Posts
Default Re: single v bottom with #6

Originally Posted by JCPERF
My boat and Masher's have #6s on the back.The problem isnt so much the HP drain, its the CG of the boat.When you go from the Bravo to the #6 it adds 320 lbs. to the back of the boat.The center of gravity now is much further back than with the Bravo.The handling characteristics might be jeopardized.
It would then seem best to move the engine foward wouldn't it?
tomcei is offline  
Old 01-01-2007, 04:44 PM
  #10  
Registered
 
McGary911's Avatar
 
Join Date: May 2002
Location: St Johns, FL
Posts: 1,174
Likes: 0
Received 0 Likes on 0 Posts
Default Re: single v bottom with #6

Wasn't there a guy at one of the radar runs a year or 2 back with a 25' Baja with 1000+ and a 6? I'll see if I can find the thread.....
McGary911 is offline  


Quick Reply: single v bottom with #6


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.