2 Pics of Cord's hull damage.
01-23-2002, 10:50 PM
#11
Charter Member #232
Charter Member
that is what I figured. Must have been a sponge as that is the only way it will do that. It takes a long time for water to make Balso do that!!! 
__________________
Put your best foot forward!
Put your best foot forward!
01-23-2002, 11:41 PM
#13
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
The boat was a '88 model. I've been told that there were a few years where they had some problems. Apparently several have failed in the same area.
I'm not really sure as to what caused the failure. Could it have been the cruiser wake that I hit earlier? I didn't have a yard stick along to see how much air I got, but the hang time was incredible!
What I do know is that 5 miles earlier I had checked the oil and the bilge was dry. Could I have hit something? Possibly, although I didn't feel anything, there was a good chop out and I've been told that at speed you won't necessarily feel a strike.
I'm not really sure as to what caused the failure. Could it have been the cruiser wake that I hit earlier? I didn't have a yard stick along to see how much air I got, but the hang time was incredible!
What I do know is that 5 miles earlier I had checked the oil and the bilge was dry. Could I have hit something? Possibly, although I didn't feel anything, there was a good chop out and I've been told that at speed you won't necessarily feel a strike.
