Wanted Black Keel Guard…..
#1
Registered
Thread Starter
Join Date: May 2006
Location: Baton Rouge
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Wanted Black Keel Guard…..
I am looking for a about a 12” strip of black Keel Guard. I just can’t see spending $100.00 + for a 4 to 6 feet when all I need is about a foot.
Just though maybe someone had some extra they would like to get rid of.
Thanks guys
-Nate
Just though maybe someone had some extra they would like to get rid of.
Thanks guys
-Nate
Last edited by dogghouse; 09-03-2007 at 10:12 AM.
#2
VIP Member
VIP Member
Re: Wanted Black Keel Guard…..
I have 3" by however long you need clear, blends right in, 20 mil thick film.
#4
Charter Member #232
Charter Member
Re: Wanted Black Keel Guard…..
I do not think it will cover a scratch because it will want to drop into the scratch and you will still see it.....
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#5
Registered
Thread Starter
Join Date: May 2006
Location: Baton Rouge
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wanted Black Keel Guard…..
I really don't see how the Keel Guard that I am showing in the picture above will not cover a small scratch in my paint?
Last edited by dogghouse; 01-27-2007 at 09:54 PM.
#7
Re: Wanted Black Keel Guard…..
Keel guards are very thick. I have one on my fish boat and beach it on the concrete ramps when the water is low rather than chance the rocks.
Maybe fill the scratch with gel coat paste and install the clear protective film from offshoredrillin ?
Bass Pro Shops offers a keel shield for a little cheaper than the keel guard.
If you can get a Megaware Keel guard for 100.00 thats a good price.
Good luck!
Jim
Maybe fill the scratch with gel coat paste and install the clear protective film from offshoredrillin ?
Bass Pro Shops offers a keel shield for a little cheaper than the keel guard.
If you can get a Megaware Keel guard for 100.00 thats a good price.
Good luck!
Jim