Ya like that, eh? So, you gonna help this week?

One day this week after work I need to yank my motor out. Wating for Flylevel to tell me which day. Other than that, I can help. Where?

Also, do you think SuperV would be up to letting me keep my motor in a corner at his place??

You'd have to ask him. Catch up with him while we're all at his shop. Probably Tuesday night. Barb and I are going to Team Automotive in Grandville shortly. Is that close to your place?

Not to far away from me.

I'll talk to him on Tuesday then.

SEEYA!

crazyhorse, just curious, what are you looking at at team automotive? Mike, what are you doing to your motor this winter?

Crazy needs a car. Something about a Toronado I think.

I have an oil issue. Not burning it, but blowing it out the port exhaust. Probably just the head (valve guides or seals). And, I need to re-do my bilge pumps. Nearly impossible with the motor in the boat. Plus, I want to re-locate my oil cooler from where it is now. Again, much easier with the motor out.

The issue I'm having is finding someplace warm to work on the motor.

What motor did you have in your boat that made it run 70 compared the 60 that I see you have posted recently? I am rebuilding my motor this winter and am a little timid about using the cam crazyhorse put in dyno's and SuperV's in a 25 foot single engine boat. I currently have a stock 454mag and it will show 62-63 on speedo. Don't really want to take a GPS out with me. Might kill my fantasy.

I had a 500 hp 454 built by a local guy that didn't last very long. Long story. I also had my drive raised 2" several years ago. The motor I'm running now just needs more revs. I don't have the right prop. In fact, I hate my prop. Just don't have the money for a new one at the moment.

Crazy is currently putting that same cam in SuperV's motors.

what prop are you running?