Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Dyno room bullet proof glass (video) (https://www.offshoreonly.com/forums/general-boating-discussion/150502-dyno-room-bullet-proof-glass-video.html)

Strip Poker 388 02-01-2007 12:34 PM

Dyno room bullet proof glass (video)
 
This is why you need it:eek: :eek: Just think if this happend the boat,Boom

http://media.putfile.com/dyno-79

Gilman 02-01-2007 12:50 PM

Re: Dyno room bullet proof glass (video)
 
That could have left a mark.

Wally 02-01-2007 01:02 PM

Re: Dyno room bullet proof glass (video)
 
looks like too much boost and it poped off the intake tube....i think the only thing that may have hit the glass was a hose clamp...i was actually expecting alot worse...

BigSilverCat 02-01-2007 01:03 PM

Re: Dyno room bullet proof glass (video)
 
now you know why all the straps were all over my engine when we were dyno'ing them.

txriverrat2001 02-01-2007 01:49 PM

Re: Dyno room bullet proof glass (video)
 

Originally Posted by Gilman (Post 2012310)
That could have left a mark.

Shouldn't you be working???

LOL!

Maybe Mungle should see this?

satisfactionII 02-01-2007 02:08 PM

Re: Dyno room bullet proof glass (video)
 
Oh my god! :D

wananewboat 02-01-2007 02:43 PM

Re: Dyno room bullet proof glass (video)
 
When they did the dyno on that 1735 hp motor did they have any type of glass?

phughes69 02-01-2007 05:03 PM

Re: Dyno room bullet proof glass (video)
 
I've done that too. Sometimes if a hose clamp is not tight enough on the intake tubing it will pop off or I have had the bypass valve hoses come off when pulling the throttle stick back because the bypass hoses are smaller that the main intake tubing.

Strip Poker 388 02-01-2007 05:48 PM

Re: Dyno room bullet proof glass (video)
 
I believe it was a hiccup not a loose clamp:eek:


I remember a story that Richie Zul told me of a harmonic balancer spinning across the floor:evilb: :evilb:

allfiredup 02-01-2007 08:29 PM

Re: Dyno room bullet proof glass (video)
 
I wish I had video of the day the toque arm broke dynoing Busch Grand National motor at about 8500. That'll ruin the motor the water brake all the water line & parts of the engine stand & makes a hell of huh mess.

wrinkleface 02-01-2007 08:42 PM

Re: Dyno room bullet proof glass (video)
 
Yikes!:eek:

J-Bonz 02-01-2007 09:21 PM

Re: Dyno room bullet proof glass (video)
 
An engineer I worked with was steady state testing a Diesel engine on the dyno (from a semi truck). He was in the test cell while it was running. He was checking some stuff out while leaning over the twin turbos. Unfortuanetly the pressure releif vavle that was changed to manual control closed. With in one step from the door, the hose between the twin turbos blew off. Which could have taken his head off!!

mrhorsepower1 02-01-2007 10:28 PM

Re: Dyno room bullet proof glass (video)
 
Richie.....You watching this?:D :drink:

JCPERF 02-01-2007 10:35 PM

Re: Dyno room bullet proof glass (video)
 

Originally Posted by mrhorsepower1 (Post 2012967)
Richie.....You watching this?:D :drink:

In all the years Dynoing at Zuls,I only get cut in the leg by shrapnel from 1 driveplate explosion and me and Richie got covered from oil from an oil filter exploding.:evilb: Whats the problem?:D

Scott B 02-02-2007 06:48 PM

Re: Dyno room bullet proof glass (video)
 
Hey, next time could ya put the camera on a tripod please??

Strip Poker 388 02-02-2007 06:54 PM

Re: Dyno room bullet proof glass (video)
 

Originally Posted by Scott B (Post 2013180)
Hey, next time could ya put the camera on a tripod please??

yea JC:D

DONZI 02-03-2007 06:33 AM

Re: Dyno room bullet proof glass (video)
 
Turbo-sized !:D
http://www.youtube.com/watch?v=ag4nLpu1nJ0

Coleman 02-03-2007 08:14 AM

Re: Dyno room bullet proof glass (video)
 

Originally Posted by DONZI (Post 2013459)

That's pretty F'en cool:cool:

TeamSaris 02-03-2007 08:43 AM

Re: Dyno room bullet proof glass (video)
 
Oops!:D

Strip Poker 388 02-03-2007 05:38 PM

Re: Dyno room bullet proof glass (video)
 

Originally Posted by DONZI (Post 2013459)

that be a bigun:D

DONZI 02-03-2007 08:52 PM

Re: Dyno room bullet proof glass (video)
 
Nothing like the sounds of a lil bench testing.:eek:
http://www.youtube.com/watch?v=xyWP7mC1oX0

Strip Poker 388 02-04-2007 10:35 AM

Re: Dyno room bullet proof glass (video)
 

Originally Posted by DONZI (Post 2014108)
Nothing like the sounds of a lil bench testing.:eek:
http://www.youtube.com/watch?v=xyWP7mC1oX0



no turbo?


All times are GMT -5. The time now is 12:18 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.