Trailer fender needed
 

I am looking for an aluminum fender for my fathers single axle
fish boat trailer. The trailer is an aluminum magic tilt. The fender is slick aluminum ( not diamond plate ) It is over a 14"
wheel. Magic tilt says that they quit using the slick aluminum fenders after 2003 & went to the diamond plate. I was hoping someone on here is either a dealer & has one in stock , or knows someone who does ect... Here are the measurements. Thanks , Scott

Re: Trailer fender needed
 

http://www.championtrailers.com/

Got one last year.

Re: Trailer fender needed
 

racer-x6 I appritiate the link. We called them right after we talked to Magic Tilt & they also no longer carry smooth aluminums all they have are the diamond plate ones.:(

Re: Trailer fender needed
 

Let me look around the shop tonight and see what I Have.

Re: Trailer fender needed
 

I really appritiate it. Just let me know.

Re: Trailer fender needed
 

no luck, sorry

Re: Trailer fender needed
 

Thats ok , I really appritiate you taking the time to look. Thanks alot.
We are still searching around. Who would ever think that a simple fender would be so hard to locate.

Re: Trailer fender needed
 

might try these guys
http://www.etrailerpart.com/mywebs/m...FQJBUQodCC36jg


finman

Re: Trailer fender needed
 

Check with Bill at Performance Custom Trailers in Lake George , NY he may be able to help you out. 518 668-3103

Re: Trailer fender needed
 

Just buy two diamond plate one's. They aren't expensive. I bought a couple a few years ago. Seems they were about $30 each.