![]() |
B-Max drives, Whos happy with them?
:evilb: :evilb:
|
what a great response:D
|
I'm not unhappy with them, In fact ive never seen one,:p
|
anybody got the b-max's behind diesel power?
|
PM docmanrich. He whippled his 525's and saw a huge increase in speed. Then he added b-max's and lost almost all of it :(
|
I had problems in the begining with 1 o-ring always leaking due to an outdated rear cap...make sure you buy ones with the newer rear cap.
I run 800hp though mine and they have held up where as the IMCO's did not. |
Define happy.:(
|
Originally Posted by docmanrich37
(Post 2027029)
Define happy.:(
|
hmmm
Originally Posted by docmanrich37
(Post 2027029)
Define happy.:(
|
I'm running them behind 750 Cobras on my cat, a few little issues but for the most part they've worked fine. They ARE the strongest "shiftable" drive.
|
Originally Posted by Tazz
(Post 2027046)
I'm running them behind 750 Cobras on my cat, a few little issues but for the most part they've worked fine. They ARE the strongest "shiftable" drive.
|
Talons are hard on drives but mine has been ok so far, another guy up here has a Talon with 575/ XR's and has been breaking gimbal rings, but as far as I know the drives have been ok. # 6's are the way to go obviously, but big $ and not shiftable.
|
Why would anybody be unhappy, I think a year is reasonable amount of time to wait for drives:rolleyes: :evilb:
|
Originally Posted by racer-x6
(Post 2027291)
Why would anybody be unhappy, I think a year is reasonable amount of time to wait for drives:rolleyes: :evilb:
It's been over a year,:eek: stir that pot....I even offered to go pick them up for him, save both parties shipping, cause that's the kinda guy I am:D |
FTN40- I think I remember that Hustler, a 50 from Chicago. He had run a 47 outer while it was on order. We fixed a fuel pump for him on the 50 at a poker run, got him going then it broke a drive before the end of the run (B-Max). He was a very nice guy as I remember.
|
Originally Posted by docmanrich37
(Post 2027029)
Define happy.:(
Originally Posted by JCPERF
(Post 2027036)
When Oldschool pops his first Mich Ultra:drink:
:evilb: :drink: :evilb: |
If somebody has been waiting for a year, there is obviously more to the story...
|
I waited about 2 months for mine, which was about a month longer than promised..
Anyway, I had IMCO's and was blowing them up left and right. I haven't blown anything up with these drives so far. But, this all makes me worried about customer service if I ever break one.... :( |
Originally Posted by docmanrich37
(Post 2027029)
Define happy.:(
Dissapointed = you lost speed. :( |
Originally Posted by racer-x6
(Post 2027291)
Why would anybody be unhappy, I think a year is reasonable amount of time to wait for drives:rolleyes: :evilb:
or headers...........:mad: |
I ordered the bmax ht's and waited 4 months for them, which was 2 months later than I was told, but isn't that the boating industry? I bought a 388 slingshot w/ blower motors and blew two drives in three weeks. Imco vertical shaft the first time, and prop shaft on the other drive the next weekend. Had the b-maxes on for 15 hours and no problems at all. I have had great service after the sale unlike some other people. Once I got over the delivery delay, they were definitely worth the wait. I don't think anything can compare that is shiftable. The lowers are still the weak link. The uppers are bulletproof. I suffered no speed loss after I got the props dialed in w/ brett @ b-blades.
|
ive had good results the service from them. i purchased my drives used, they have always sent what i needed quickly.
|
| All times are GMT -5. The time now is 12:58 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.